
The AirTAC SE63 Standard Cylinder SE63BX450SCA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 450mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63BX450SCA is a double-acting single-rod profile cylinder built to ISO 15552 dimensions, delivering a robust 1559 N push force at 0.5 MPa. It features a SUS304 stainless steel piston rod engineered for corrosive environments and washdown duty. The square extruded aluminum barrel eliminates external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting mechanical corrosion.
This 63mm bore unit includes a built-in position magnet for CMSE reed and DMSE electronic sensors, enabling precise end-of-stroke detection. Field-adjustable air cushioning at both ends allows technicians to tune the deceleration of the 450mm stroke via a set screw, softening hard end stops without relying on fixed rubber bumpers.
| Model | Airtac SE63 Standard Cylinder SE63BX450SCA |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Leverages the 1559 N push force and SUS304 rod to reliably divert heavy beverage crates on a washdown packaging conveyor, resisting moisture and chemical cleaners.
Utilizes the 450mm stroke and CA clevis mount to extend and grip stretch film rolls on an automated pallet wrapping station, ensuring secure load stabilization.
Employs the 2182 N push at 0.7 MPa to eject formed aluminum brackets from a stamping die, relying on DMSE electronic sensors to confirm part release.
Selecting this 63mm bore provides 1559 N push at 0.5 MPa. If your application requires less force, the neighboring 50mm bore offers 982 N push; if you need more power, stepping up to the 80mm bore yields 2513 N push. Because this model uses a CA single clevis mount and a 450mm stroke, the extended rod is subject to bending moments under heavy side loads—an external guide bearing is recommended to prevent premature seal wear.
This cylinder is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 cylinders. It uses a PT3/8 port, a CA mounting accessory, and an -S magnet. Note that the adjustable air cushion only decelerates the piston near stroke end; it is not a locking device. If the machine must hold a vertical load without live air pressure, integrate a BSE rod lock or an external pilot-operated check valve.
Quick checklist
At 0.5 MPa, this 63mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The maximum push force is 318 kgf at 1.0 MPa, and the operational speed range is 30-800 mm/s.
Yes, the SE63BX450SCA is dimensionally interchangeable per ISO 15552, meaning it shares standard mounting dimensions and can serve as a direct replacement for other ISO 15552 profile cylinders. It uses a PT3/8 port and includes a CA single clevis mount.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.