Airtac SE63 Standard Cylinder SE63BX500
The AirTAC SE63 Standard Cylinder SE63BX500 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 500mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke500 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63BX500
The AirTAC SE63BX500 is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 500 mm stroke. It delivers a robust 1559 N push force at 0.5 MPa, utilizing a 63 mm bore paired with a PT3/8 port. This specific configuration integrates a SUS304 stainless steel rod (code B), making the actuator highly resistant to corrosion and ideally suited for washdown or chemically aggressive settings.
The extruded aluminum barrel design omits external tie rods, yielding a compact, flush-mounting footprint that simplifies sensor placement across three integrated grooves. Because this SKU lacks the -S magnet code, it is not wired for CMSE or DMSE position sensing out of the box. Field-adjustable pneumatic cushioning at both ends allows technicians to fine-tune end-of-stroke deceleration, softening hard impacts during high-speed 30-800 mm/s cycling.
Airtac SE63 Standard Cylinder SE63BX500 Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63BX500 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63BX500
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63BX500 Is Used
Bottling Line CIP Resistance
The SUS304 stainless rod withstands caustic clean-in-place spray, providing 1559 N of push force to actuate diverter gates in beverage filling lines.
Pallet Transfer Rejector
Delivering a 500 mm stroke, this cylinder extends to push off-spec pallets off a high-speed transfer deck before they reach the wrapping station.
Vertical Case Erector Arm
Provides the extended reach and 1402 N pull force required to fold heavy corrugated cardboard blanks on large-format packaging machinery.
Is the Airtac SE63 Standard Cylinder SE63BX500 the Right Cylinder?
When sizing this 63 mm bore actuator, evaluate your force margins: stepping down to the 50 mm bore drops the 0.5 MPa push output to 982 N, while upgrading to the 80 mm bore increases it to 2513 N. This SE63BX500 variant uses a PT3/8 port and a standard M16x1.5 rod thread, ensuring a dimensionally interchangeable direct replacement for any existing ISO 15552 mounting footprint.
Because this model features a 500 mm stroke, the unsupported length of the rod is substantial; lateral side loads can induce bending stresses on the rod bearing, so incorporating an external guide mechanism is strongly recommended to prevent premature wear. Furthermore, a standard double-acting cylinder drifts when air is removed or a valve centers—the adjustable end cushions only decelerate the piston near stroke end and do not function as a locking brake. If your process requires true load holding without live air pressure, consider the BSE rod-lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63BX500 FAQ
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, and it cycles at speeds of 30-800 mm/s.
No. The adjustable air cushions at both ends only serve to decelerate the piston near the stroke limits and do not act as a braking mechanism. If the air supply is lost or the valve is centered, the piston will drift. For fail-safe load holding, you must use a BSE series rod lock cylinder or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63BX500
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.