
The AirTAC SE63 Standard Cylinder SE63BX600 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 600mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63BX600 is a double-acting single-rod ISO 15552 profile cylinder engineered for a 600 mm stroke. It delivers a robust 1559 N push force at 0.5 MPa and relies on a field-adjustable air cushion at both ends to decelerate the piston near stroke end, preventing hard mechanical impacts during high-speed traversal. This adjustable cushioning is a genuine velocity-control mechanism, not a static bumper or a locking brake.
This specific SKU features a SUS304 stainless steel rod (option B) for superior corrosion resistance in washdown or chemically hostile settings. The extruded aluminum barrel omits external tie rods, presenting a clean, flush-mounting profile that simplifies sensor placement along three integrated grooves. Note that this unit lacks a built-in position magnet, so it cannot directly host AirTAC CMSE or DMSE switches without modification.
| Model | Airtac SE63 Standard Cylinder SE63BX600 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 1559 N push force at 0.5 MPa and 600 mm stroke to push heavy beverage crate stacks onto secondary packaging lanes without stalling.
Leverages the SUS304 stainless steel rod to drive a chemical spray bar across a 600 mm range, resisting daily caustic washdowns without pitting.
Extends 600 mm to index metal scrap conveyors, relying on the field-adjustable air cushion to soften end-of-stroke impacts despite heavy metal shavings.
Selecting this 63 mm bore makes sense when a 50 mm bore (982 N push at 0.5 MPa) is underpowered, but an 80 mm bore (2513 N push at 0.5 MPa) would waste valuable machine space and air consumption. The 600 mm stroke is fully standard for this bore size, meaning fast availability without made-to-order delays. Because this is a standard double-acting cylinder, it cannot hold a load or maintain its position if air pressure drops or the valve centers; the piston will drift. For critical load-holding requirements, pair it with an external pilot-operated check valve or step up to an AirTAC BSE rod-lock cylinder.
At 600 mm of travel, the unsupported rod length increases susceptibility to bending under lateral loads, making an external guide rail essential to prevent premature bearing wear. The PT3/8 porting and M16x1.5 rod thread match the standard ISO 15552 footprint, allowing direct replacement for other ISO 15552 cylinders using identical mounting hardware.
Quick checklist
At 0.5 MPa, it provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, push increases to 2182 N. The maximum push force is 318 kgf at 1.0 MPa, with an operating speed range of 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552 standards, allowing it to drop into existing mounting hardware. However, note this specific SKU lacks a built-in magnet, so it cannot interface with CMSE or DMSE position sensors directly.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.