Airtac SE63 Standard Cylinder SE63BX600H
The AirTAC SE63 Standard Cylinder SE63BX600H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 600mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke600 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63BX600H
The AirTAC SE63BX600H is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding environments. It delivers a robust 1559 N push force at 0.5 MPa and features a 600 mm stroke. Configured with a SUS304 stainless steel rod (code B) and a high-temperature FKM seal (code H), this unit reliably operates in ambient temperatures up to 150 C, making it ideal for corrosive washdown or high-heat industrial settings.
Unlike traditional tie-rod cylinders, its square extruded aluminum barrel integrates sensor grooves on three sides, allowing for flush mounting and flexible bracket placement. The pneumatic cushioning at both ends is field-adjustable via a screw, letting you precisely tune end-stop deceleration for the 30-800 mm/s operating speed range. Note that this specific SKU lacks a built-in magnet, so it is not wired for CMSE or DMSE electronic position sensing.
Airtac SE63 Standard Cylinder SE63BX600H Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63BX600H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63BX600H
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63BX600H Is Used
Chemical Washdown Station
The SUS304 rod and FKM Viton seal withstand caustic washdowns in food and chemical processing, while the 1559 N push force reliably actuates heavy spray nozzle assemblies.
Injection Mold Ejection
Operating near 150 C ovens or molding presses, this 600 mm stroke cylinder extracts hot plastic parts, using its adjustable cushioning to prevent harsh end impacts at high speeds.
Metal Staging Pusher
Moves heavy steel blanks across a 600 mm conveyor gap, where the no-tie-rod extruded profile prevents grease and debris buildup while handling the 318 kgf maximum load.
Is the Airtac SE63 Standard Cylinder SE63BX600H the Right Cylinder?
If your application requires less force, stepping down to the 50 mm bore yields a 982 N push at 0.5 MPa, which saves space and air consumption. If you need more thrust, stepping up to the 80 mm bore provides a 2513 N push at 0.5 MPa. Keep in mind that a standard double-acting cylinder does not hold its load when air is lost or the valve is centered; the piston will drift. For position holding without live pressure, consider the BSE rod lock variant. Because this model features a 600 mm stroke, the 20 mm rod is subjected to significant bending moments under side loads; an external guide is strongly recommended to prevent premature rod-bearing wear. For ISO 15552 direct retrofits, match the 63 mm bore, 600 mm stroke, PT3/8 port, and your required mounting accessory.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63BX600H FAQ
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N, with an absolute maximum push of 318 kgf at 1.0 MPa. Thanks to the FKM seal, it operates in temperatures up to 150 C with a speed range of 30-800 mm/s.
Yes, its standardized ISO 15552 / VDMA 24562 mounting dimensions make it a direct replacement for other profile cylinders of the same bore. However, the adjustable air cushion only decelerates the piston near the stroke end; it is not a brake. If air is lost, the cylinder will drift, so a BSE rod lock is needed for fail-safe load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63BX600H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.