Airtac SE63 Standard Cylinder SE63BX600S
The AirTAC SE63 Standard Cylinder SE63BX600S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 600mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke600 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63BX600S
The AirTAC SE63BX600S is a double-acting single-rod ISO 15552 profile cylinder engineered for a 63 mm bore and a 600 mm stroke. It generates 1559 N of push force at 0.5 MPa and features a SUS304 stainless steel rod, making it highly suitable for corrosive or washdown environments where a standard carbon steel rod would fail.
Built to VDMA 24562 standards, this unit utilizes a square extruded aluminum barrel without external tie rods, keeping the body compact and flush-mountable. The integrated magnet enables position detection with CMSE reed or DMSE electronic sensors, while the field-adjustable air cushioning at both ends allows you to tune end-of-stroke deceleration for high-speed 30-800 mm/s cycles.
Airtac SE63 Standard Cylinder SE63BX600S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63BX600S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63BX600S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63BX600S Is Used
Bottling Line Diverter
With a 600 mm stroke and 1559 N push force, this cylinder actuates diverter gates on rinse lines, while the SUS304 rod withstands splashdown and wash chemicals.
Pallet Accumulation Stop
Halts heavy pallets accumulating on roller conveyors, using its 318 kgf max force to brake momentum and the adjustable cushion to soften hard mechanical stops.
Chemical Dip Elevator
Lowers and raises components into chemical wash tanks, leveraging the 63 mm bore power and SUS304 stainless rod for reliable operation in highly corrosive atmospheres.
Is the Airtac SE63 Standard Cylinder SE63BX600S the Right Cylinder?
For sizing context, this 63 mm bore provides 1559 N push at 0.5 MPa. If your application requires less force, the neighboring 50 mm bore offers 982 N; if you need more power, the 80 mm bore delivers 2513 N. Because this is a 600 mm stroke, the unsupported load can induce side-load bending on the rod bearing, so utilizing an external guide is strongly recommended to prevent premature wear.
As a standard double-acting cylinder, the SE does not hold its position or load when air is exhausted or the valve is centered. If your machine requires true position holding without live pressure, consider the BSE rod lock variant. For retrofitting, this model is dimensionally interchangeable with other ISO 15552 cylinders, utilizing a PT3/8 port and standard mounting accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63BX600S FAQ
The SE63BX600S delivers a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force is 2182 N, with a maximum push of 318 kgf at 1.0 MPa. It operates at speeds between 30-800 mm/s.
Yes, the SE63BX600S is dimensionally interchangeable per ISO 15552 standards. It shares the exact 63 mm mounting footprint and PT3/8 port interface of other ISO 15552 profile cylinders, allowing a direct replacement.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63BX600S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.