Airtac SE63 Standard Cylinder SE63BX600SH
The AirTAC SE63 Standard Cylinder SE63BX600SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 600mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke600 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63BX600SH
The AirTAC SE63BX600SH is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 1559 N push force at 0.5 MPa. It features a SUS304 stainless steel rod and a high-temperature FKM seal, extending the operating range to 150 C for aggressive washdown environments. The square extruded aluminum barrel eliminates external tie rods, yielding a compact body that mounts flush against machine frames while resisting corrosion.
This 63 mm bore unit travels a 600 mm stroke and relies on field-adjustable pneumatic cushioning at both ends to decelerate the piston smoothly before end-of-stroke impact. Because it carries an integrated magnet, the cylinder directly supports AirTAC CMSE reed and DMSE electronic sensors for precise position detection along its travel.
Airtac SE63 Standard Cylinder SE63BX600SH Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63BX600SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63BX600SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63BX600SH Is Used
Bottling Line Diverter
Routes heavy glass beverage containers on a washdown line, using the 600 mm stroke and SUS304 rod to withstand harsh chemical cleaning cycles.
Thermal Test Chamber Door
Actuates a 150 C oven access panel, relying on the FKM seal to maintain flexibility and the 1559 N push force to move the insulated barrier.
Pallet Film Carriage
Lifts and positions a stretch wrap film roll assembly on a packaging machine, utilizing the 63 mm bore power and DMSE electronic sensors for tracking.
Is the Airtac SE63 Standard Cylinder SE63BX600SH the Right Cylinder?
Selecting this 63 mm bore makes sense when you need 1559 N push at 0.5 MPa but want to avoid the bulk of the 80 mm version, which outputs 2513 N. If your load is lighter, stepping down to the 50 mm bore provides 982 N of push force. For this 600 mm stroke, the 20 mm rod and M16x1.5 thread provide structural integrity, but the extended length increases the risk of rod-bearing bending under side loads; always incorporate an external guide to support the payload. Dimensionally interchangeable per ISO 15552, this cylinder drops in seamlessly with standard mounting hardware and PT3/8 ports. Note that the adjustable air cushion only softens end stops; it will not hold a load vertically if air pressure is lost, which requires a BSE rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63BX600SH FAQ
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s.
Yes, the SE63BX600SH is dimensionally interchangeable per ISO 15552, meaning it shares standard mounting footprint and PT3/8 port locations with other ISO 15552 profile cylinders. You can drop it into existing setups using standard FA or LB mounting accessories.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63BX600SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.