Airtac SE63 Standard Cylinder SE63BX60S
The AirTAC SE63 Standard Cylinder SE63BX60S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 60mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke60 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63BX60S
The AirTAC SE63BX60S is a double-acting, single-rod ISO 15552 profile cylinder engineered for rigorous duty. It generates 1559 N of push force at 0.5 MPa and 2182 N at 0.7 MPa, utilizing a 63 mm bore and 60 mm stroke. The extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against frames while resisting corrosion.
This specific configuration integrates a SUS304 stainless steel rod (code B) for superior resistance in corrosive or washdown environments, alongside a built-in magnet (code S) for position detection. The end caps house field-adjustable pneumatic cushioning, allowing technicians to tailor end-of-stroke deceleration via a set screw rather than relying on fixed rubber bumpers.
Airtac SE63 Standard Cylinder SE63BX60S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63BX60S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63BX60S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63BX60S Is Used
Flow Wrapper End-Sealing
Drives the crimping jaws on horizontal flow wrappers, using the 1559 N push force to seal packaging film securely in food-grade environments.
Diverter Gate Actuation
Powers pneumatic routing gates on sorting conveyors, where the SUS304 rod withstands humid or washdown conditions during daily sanitation cycles.
CNC Lathe Chuck Guard
Actuates safety interlock doors on machine tools, relying on the compact tie-rod-free profile and DMSE electronic sensors to confirm barrier closure.
Is the Airtac SE63 Standard Cylinder SE63BX60S the Right Cylinder?
Selecting this 63 mm bore yields a 1559 N push at 0.5 MPa. If your application requires less force, the 50 mm bore offers 982 N of push; if you need greater thrust, the 80 mm bore provides 2513 N. Because this is a standard double-acting cylinder, it cannot hold a load if air pressure drops—deploy a BSE rod lock for fail-safe positioning.
As a dimensionally interchangeable ISO 15552 component, it serves as a direct replacement sharing standard mounting hardware. This unit includes a PT3/8 port, a SUS304 rod, and a built-in magnet compatible with CMSE and DMSE sensors. With a 60 mm stroke, side-load stress on the rod bearing is minimal, but always verify load alignment.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63BX60S FAQ
The SE63BX60S delivers a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at the maximum operating pressure of 1.0 MPa.
Yes, the SE63BX60S is dimensionally interchangeable per ISO 15552 standards, allowing it to serve as a direct replacement for other ISO 15552 profile cylinders using existing mounting accessories and PT3/8 ports.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63BX60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.