Airtac SE63 Standard Cylinder SE63BX80S
The AirTAC SE63 Standard Cylinder SE63BX80S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 80mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke80 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63BX80S
The AirTAC SE63BX80S is a double-acting single-rod ISO 15552 profile cylinder engineered for 80 mm stroke applications. It features a robust 63 mm bore generating 1559 N of push force at 0.5 MPa, making it well-suited for mid-range industrial actuation. Equipped with a SUS304 stainless steel piston rod, this variant directly addresses corrosion resistance and washdown requirements where standard carbon steel rods would fail.
The extruded aluminum barrel design omits external tie rods, yielding a smooth, compact body that mounts flush against machine frames while preventing dirt accumulation. Integrated sensor grooves on three sides allow flexible placement of CMSE reed or DMSE electronic switches, capitalizing on the built-in magnet for precise end-of-stroke detection. Furthermore, the field-adjustable air cushioning at both ends allows technicians to tune deceleration via a set screw, softening hard mechanical impacts during high-speed cycling.
Airtac SE63 Standard Cylinder SE63BX80S Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63BX80S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63BX80S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63BX80S Is Used
Stainless Pallet Strapping
Drives a strapping head tensioner on a stainless steel palletizer, using the 1559 N push force and SUS304 rod to withstand humid, washdown-heavy logistics environments.
Chemical Dispense Diverter
Actuates a flow diverter valve in a chemical blending skid, where the 80 mm stroke and corrosion-resistant B-code rod material prevent fluid degradation of the actuator.
CNC Lathe Door Guard
Opens and closes a heavy CNC machining center safety door, relying on the adjustable end cushions to soften the 80 mm travel at high speeds without bouncing.
Is the Airtac SE63 Standard Cylinder SE63BX80S the Right Cylinder?
Selecting this 63 mm bore provides 1559 N push at 0.5 MPa. If your assembly requires less force, stepping down to the 50 mm bore yields 982 N push, whereas moving up to the 80 mm bore provides 2513 N push for heavier payloads. Because this is a double-acting cylinder, it relies on continuous air pressure to maintain position; if your application must hold a load safely during air loss or valve centering, consider the BSE rod-lock variant or an external pilot-operated check valve. For retrofitting, this model is dimensionally interchangeable with other ISO 15552 cylinders, utilizing a PT3/8 port, the standard mounting footprint, and the -S magnet option for sensor tracking.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63BX80S FAQ
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force is 2182 N, with an absolute maximum push of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE63BX80S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint, 20 mm rod diameter, and PT3/8 port size of other compliant cylinders. The built-in magnet also allows direct integration with AirTAC CMSE and DMSE position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63BX80S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.