
The AirTAC SE63 Standard Cylinder SE63X1000STC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 1000mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X1000STC is a double-acting, single-rod ISO 15552 profile cylinder engineered for rigorous linear motion tasks. Operating at 0.5 MPa, it generates 1559 N of push force and 1402 N of pull force, making it well-suited for mid-range industrial actuation. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush within tight machinery envelopes.
This specific configuration includes a TC centre trunnion mount for pivot-action stability and a built-in magnet compatible with AirTAC CMSE reed and DMSE electronic sensors. Field-adjustable pneumatic cushioning at both ends allows technicians to soften end-of-stroke impacts, ensuring smooth deceleration rather than relying on a fixed bumper. The PT3/8 port and M16x1.5 rod thread provide standardized connectivity for rapid system integration.
| Model | Airtac SE63 Standard Cylinder SE63X1000STC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Pushes raw bar stock through a spindle with 1559 N of thrust over the full 1000 mm travel, relying on the TC trunnion mount to accommodate slight angular misalignment.
Moves heavy workpiece pallets off an assembly line conveyor, utilizing the adjustable end cushions to decelerate 318 kgf maximum loads smoothly at high speeds.
Extracts moulded plastic parts from a press cavity, using the integrated magnet to trigger DMSE electronic sensors for precise end-position confirmation.
When sizing this actuator, consider stepping down to a 50 mm bore (982 N push at 0.5 MPa) for lighter loads, or up to an 80 mm bore (2513 N push at 0.5 MPa) if your application demands greater thrust. As a standard ISO 15552 profile cylinder, it serves as a direct replacement dimensionally interchangeable with other ISO 15552 cylinders, sharing standard mounting hardware. Note that a plain SE cylinder does not hold a load when air is exhausted; if position holding is required without live pressure, consider a BSE rod lock. Furthermore, at 1000 mm stroke, the unsupported rod is highly susceptible to bending under side loads, making an external guide essential to prevent premature bearing wear.
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed ranges from 30 to 800 mm/s.
Yes, the SE63X1000STC is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting interface and footprint of other ISO 15552 profile cylinders for seamless retrofitting. It features a PT3/8 port and a TC centre trunnion mount.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.