
The AirTAC SE63 Standard Cylinder SE63X100FTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X100FTC is a double-acting, single-rod ISO 15552 profile cylinder engineered for robust linear motion. It delivers 1559 N of push force and 1402 N of pull force at 0.5 MPa, utilizing a 63 mm bore and a 100 mm stroke. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This FTC-mounted unit features field-adjustable pneumatic cushioning at both ends, allowing technicians to tune end-of-stroke deceleration via a set screw rather than relying on fixed rubber bumpers. Note that this specific SKU lacks a built-in magnet, meaning it will not directly support AirTAC CMSE or DMSE position sensors without modification.
| Model | Airtac SE63 Standard Cylinder SE63X100FTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 1559 N push force to fold heavy cardboard flaps on high-speed packaging lines, where the 100 mm stroke provides precise travel without overextending.
Leverages the FTC trunnion mount to pivot a diverter arm smoothly across a conveyor belt, guiding heavy pallets into secondary processing lanes.
Employs the 1402 N retract force to pull a stamping die ejector pin back to its home position, relying on the adjustable cushion to soften the stop at 100 mm.
Selecting this 63 mm bore makes sense when you need 1559 N of push force at 0.5 MPa. If your application requires less force, stepping down to the 50 mm bore yields 982 N of push, while moving up to the 80 mm bore provides 2513 N. The integrated FTC mounting accessory provides a fixed center trunnion pivot, ideal for angular load requirements. Keep in mind that a standard SE cylinder will drift if air pressure is lost or the valve is centered; if your machine must hold a load safely without live pressure, consider the BSE rod-lock variant. Furthermore, this unit lacks the -S magnet, so position feedback requires external sensors.
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. It features a PT3/8 port, a 20 mm rod with an M16x1.5 thread, and operates at speeds of 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552 standards, serving as a direct replacement for other ISO 15552 profile cylinders without requiring new mounting holes. However, this specific FTC-mounted SKU does not include a built-in magnet (-S), so it cannot host AirTAC CMSE or DMSE electronic position sensors directly.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.