
The AirTAC SE63 Standard Cylinder SE63X100SCB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X100SCB is a double-acting, single-rod ISO 15552 profile cylinder engineered for rigorous pneumatic tasks, delivering a robust 1559 N push force at 0.5 MPa. It features a square extruded aluminum barrel that omits external tie rods, yielding a highly compact, corrosion-resistant body that mounts flush against machine frames without protruding hardware.
This specific configuration includes a CB double clevis mounting interface for pivoting movements and a built-in magnet (-S) compatible with CMSE reed and DMSE electronic sensors. To protect the piston and mechanical loads from harsh end-of-stroke impacts, the cylinder integrates field-adjustable air cushions at both ends, allowing technicians to precisely tune deceleration via a set screw.
| Model | Airtac SE63 Standard Cylinder SE63X100SCB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Leveraging the CB double clevis mount, this 63 mm cylinder swings heavy diverter gates on packaging lines, utilizing its 1559 N push force to overcome the rotational inertia of the hinged mechanism.
Provides precise vertical pressure for rotary capping turrets, where the 100 mm stroke accommodates varying bottle heights and the adjustable cushion softens the capping head descent.
Raises and lowers heavy pallet stop mechanisms on roller conveyors, relying on the 318 kgf maximum thrust to halt dense product loads without deflection.
Delivering 1559 N of push force at 0.5 MPa, this 63 mm bore is a strong mid-range actuator. If your application requires less force, the 50 mm bore variant provides 982 N of push, whereas scaling up to the 80 mm bore yields 2513 N for heavier payloads. Keep in mind that a standard SE cylinder cannot hold a load or maintain its position if air pressure is lost or the valve is centered; the piston will drift. For suspended or gravity-loaded pivoting setups utilizing the CB clevis, consider adding a BSE series rod lock for secure fail-safe holding.
This model is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 cylinders and shared mounting hardware. It features a PT3/8 port, a 100 mm stroke, and the -S magnet option for CMSE / DMSE position sensing.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, and it reaches a maximum of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE63X100SCB is built to the ISO 15552 / VDMA 24562 dimensional standard, making it a direct replacement for other ISO 15552 profile cylinders. It shares the standardized mounting footprint and utilizes a PT3/8 port, a 20 mm rod, and M16x1.5 rod-end threading.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.