
The AirTAC SE63 Standard Cylinder SE63X100SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X100SFTC is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a robust 1559 N push force at 0.5 MPa. Equipped with a built-in position magnet and a center trunnion (FTC) mounting accessory, it integrates seamlessly into demanding motion control setups.
Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush while retaining the standardized ISO 15552 footprint. The field-adjustable air cushioning at both ends allows technicians to fine-tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed 30-800 mm/s operations.
| Model | Airtac SE63 Standard Cylinder SE63X100SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 1559 N of clamping force at 0.5 MPa to secure heavy cast iron engine blocks during high-speed CNC machining operations.
Utilizes the 100 mm stroke and FTC trunnion mount to pivot and actuate heavy pallet stacking gates in automated end-of-line packaging systems.
Leverages the built-in magnet for CMSE position sensing to rapidly extend a diverter arm, routing heavy parcels on high-throughput distribution conveyors.
Selecting this 63 mm bore provides 1559 N of push at 0.5 MPa, striking a balance between the smaller 50 mm bore (982 N push) and the larger 80 mm bore (2513 N push) for medium-duty tasks. The integrated FTC trunnion mount is ideal for pivoting mechanisms, though an external guide is recommended if side loads are present.
As a standard ISO 15552 cylinder, it serves as a direct replacement for other ISO 15552 cylinders, sharing identical mounting interface dimensions. Note that the adjustable air cushion only decelerates the piston near stroke end and does not lock the rod; if your pivot application must hold a load without live air pressure, consider the BSE rod lock variant.
Quick checklist
This 63 mm bore cylinder generates 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates at speeds ranging from 30-800 mm/s.
Yes, the SE63X100SFTC is dimensionally interchangeable per ISO 15552 standards. You can use it as a direct replacement for other ISO 15552 profile cylinders, retaining your existing PT3/8 port and FTC mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.