
The AirTAC SE63 Standard Cylinder SE63X100STC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X100STC is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while leaving the three integrated sensor grooves fully accessible for position tracking.
This specific configuration includes a built-in magnet (-S) for CMSE reed or DMSE electronic sensors, alongside a center trunnion (TC) mounting interface. Field-adjustable pneumatic cushioning at both stroke ends allows technicians to fine-tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed cycling.
| Model | Airtac SE63 Standard Cylinder SE63X100STC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the mechanical arms on automated case erectors, using the 1559 N push force to fold heavy corrugated board reliably at high cycle rates.
Actuates diverter gates on packaging conveyor lines, where the 100 mm stroke provides the exact reach needed to push standard pallets onto secondary transfer belts.
Positions multi-tier sample racks inside analytical equipment, utilizing the TC trunnion mount for smooth pivoting and the -S magnet for DMSE electronic position verification.
Stepping down to a 50 mm bore reduces the 0.5 MPa push to 982 N, whereas upgrading to an 80 mm bore increases it to 2513 N. The 100 mm stroke here operates well within the 30-800 mm/s speed range, but because the TC trunnion allows pivoting, ensure the rod-end joint aligns to prevent side-load binding. Note that this cylinder relies on live air pressure to move; if air is lost, the piston drifts, so use a BSE rod lock for static holding. As a true ISO 15552 cylinder, it drops directly into standardized mounting footprints without proprietary hardware.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X100STC generates 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It uses a PT3/8 port and features a 20 mm rod with an M16x1.5 thread.
Yes, the SE63X100STC is dimensionally interchangeable per ISO 15552 standards, meaning it shares identical mounting footprint and port distances with other standard profile cylinders, though you should verify that your DMSE or CMSE sensors are compatible with the AirTAC magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.