
The AirTAC SE63 Standard Cylinder SE63X105 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 105mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X105 is a double-acting single-rod ISO 15552 profile cylinder delivering a 1559 N push force at 0.5 MPa. Its square extruded aluminum barrel completely removes external tie rods, yielding a flush, corrosion-resistant body that mounts cleanly against machine frames.
This 63 mm bore unit features a PT3/8 port and a 36 mm adjustable air cushion at both ends to soften hard end stops. Note that this specific SKU lacks the -S magnet, so it cannot host CMSE or DMSE position sensors without modification.
| Model | Airtac SE63 Standard Cylinder SE63X105 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 105 mm stroke to open and close heavy machine tool safety enclosures, relying on the 1559 N push to overcome guide resistance.
Drives the folding flaps on continuous flow packaging lines where the field-adjustable cushion absorbs the 36 mm end-of-stroke impact.
Pushes lightweight plastic parts out of the moulding zone, utilizing the tie-rod-free profile to avoid snagging on adjacent tooling.
Delivering 1559 N push at 0.5 MPa, this bore fits neatly between the 50 mm (982 N) and 80 mm (2513 N) sizes, letting you step down for lighter duty or up for heavier loads. Because it is a plain double-acting cylinder, it will drift if air is lost; use a BSE rod lock for strict holding. As a dimensionally interchangeable ISO 15552 cylinder, it drops into existing foot or flange mounts seamlessly.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 1559 N and the pull force is 1402 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa.
Yes, it shares standard ISO 15552 / VDMA 24562 mounting dimensions, making it a direct replacement for other profile cylinders. Just ensure your setup accommodates the PT3/8 port and lacks a need for position sensors, as this SKU has no internal magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.