
The AirTAC SE63 Standard Cylinder SE63X1080S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 1080mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X1080S is a double-acting single-rod ISO 15552 profile cylinder engineered for a 63 mm bore and a 1080 mm stroke. Because this stroke exceeds the standard 1500 mm maximum catalog stroke for this bore, it is supplied as a non-standard, made-to-order unit. It generates 1559 N of push force and 1402 N of pull force at 0.5 MPa, utilizing a PT3/8 port and a 20 mm hard-chrome plated rod.
The extruded aluminum barrel lacks external tie rods, presenting a smooth, corrosion-resistant profile that mounts flush within tight machine envelopes. Field-adjustable pneumatic cushioning at both ends allows you to dial in the end-of-stroke deceleration for a 1080 mm travel, softening hard impacts at high speeds. Equipped with a built-in magnet (-S), it interfaces directly with AirTAC CMSE reed and DMSE electronic sensors for precise position feedback.
| Model | Airtac SE63 Standard Cylinder SE63X1080S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 1080 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×1080 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a 1080 mm routing arm on a packaging conveyor to divert heavy wooden pallets, utilizing the 1559 N push force to overcome carton friction.
Drives long extruded metal bars into a lathe spindle, where the 63 mm bore provides consistent thrust and the DMSE electronic sensor confirms material seating.
Extends 1080 mm to pull heavy steel storage trays from high-density shelving units, relying on the no-tie-rod profile to avoid snagging adjacent racks.
Selecting this bore centers on matching your load to its 1559 N push at 0.5 MPa. If your application requires less force, stepping down to the 50 mm bore yields 982 N of push, saving space and air consumption. Conversely, if you need more thrust, stepping up to the 80 mm bore provides 2513 N of push. Remember that a plain double-acting cylinder does not hold its load when air is exhausted or the valve is centered; the piston will drift. If your machine requires true position holding, consider the BSE rod lock variant.
Because this model features a 1080 mm stroke, the long unsupported piston rod is highly susceptible to bending under side loads. You must use an external guide mechanism to prevent rod-bearing damage and premature seal wear. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other ISO 15552 profile cylinders, utilizing standard mounting hardware and matching the PT3/8 port and M16x1.5 rod thread.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 1559 N and the pull force is 1402 N. At 0.7 MPa, the push force increases to 2182 N. The maximum push force is 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552 and serves as a direct replacement for other ISO 15552 profile cylinders using standard mounting accessories. The built-in magnet (-S) works specifically with AirTAC CMSE reed switches and DMSE electronic sensors for end-of-stroke position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.