verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X110

The AirTAC SE63 Standard Cylinder SE63X110 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 110mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke110 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$88.37 $95.87Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X110

The AirTAC SE63X110 is a double-acting single-rod ISO 15552 profile cylinder delivering a 1559 N push force at 0.5 MPa. It features a square extruded aluminum barrel without external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. The standardized ISO 15552 mounting interface ensures strict dimensional interchangeability for seamless retrofits.

This 63 mm bore unit utilizes a PT3/8 port and a 20 mm hard-chrome plated rod with an M16x1.5 thread. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed 30-800 mm/s cycles. This specific SKU lacks a built-in magnet, meaning it is not equipped for CMSE or DMSE position sensing out of the box.

Airtac SE63 Standard Cylinder SE63X110 Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X110
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke110 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X110

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×110Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X110 Is Used

conveyor_belt

Pallet Diverters

Actuates routing arms on 1559 N push force to redirect heavy pallets on packaging lines without tie-rod obstruction.

precision_manufacturing

CNC Tool Changers

Drives the 110 mm stroke to unlock and swing tool magazines, relying on adjustable cushioning to protect precision spindles.

factory

Injection Molding Ejectors

Pushes finished plastic parts out of molds using its 20 mm rod, benefiting from the flush aluminum profile in tight cells.

Is the Airtac SE63 Standard Cylinder SE63X110 the Right Cylinder?

Delivering 1559 N of push force at 0.5 MPa, this 63 mm bore cylinder is ideally sized for medium-duty actuation. If your application requires less force, the 50 mm bore model offers 982 N of push, whereas stepping up to the 80 mm bore provides a substantial 2513 N for heavier loads. Remember that a plain SE cylinder relies on live air pressure to maintain its position; if air is lost or the valve is centered, the piston will drift, and the adjustable cushion only decelerates the stroke near the end points rather than locking the load. For tasks needing secure holding without continuous pressure, consider the BSE rod lock variant. To match existing hardware, verify the 110 mm stroke, PT3/8 port, and mounting accessory type.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X110 FAQ

At 0.5 MPa, the SE63X110 provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force is 2182 N, with a maximum push of 318 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s and uses a PT3/8 port.

Yes, the SE63X110 is dimensionally interchangeable per ISO 15552 standards, allowing it to serve as a direct replacement for other ISO 15552 profile cylinders using existing mounting hardware and footprint dimensions.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X110

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X110 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.