verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X125FA

The AirTAC SE63 Standard Cylinder SE63X125FA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 125mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke125 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$100.00 $107.50Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X125FA

The AirTAC SE63X125FA is a double-acting single-rod profile cylinder with a 63 mm bore and 125 mm stroke, delivering a robust 1559 N push force at 0.5 MPa. Built to the ISO 15552 / VDMA 24562 standard, its square extruded aluminum barrel completely eliminates external tie rods. This clean-profile design resists corrosion and allows accessories to mount flush against the body, which is particularly beneficial for keeping your machine footprint compact.

This specific SKU is configured with an FA front flange mounting interface, providing a rigid front-face anchor point that handles high-inertia loads without shifting. It uses a PT3/8 port and a Ø20 mm rod with an M16x1.5 thread. Because this unit lacks the -S magnet option, it cannot host CMSE or DMSE position sensors without modification, so it is best deployed in mechanically sequenced setups or where external limit switches are already used.

Airtac SE63 Standard Cylinder SE63X125FA Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X125FA
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke125 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X125FA

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×125Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X125FA Is Used

packaging

Carton Forming Arms

Drives the mechanical arms on case erectors, using the 1559 N push force to fold and square corrugated board blanks before adhesive application.

straighten

Press Brake Ejector

Ejects formed sheet metal panels from press brakes, relying on the FA front flange to keep the cylinder rigidly aligned against heavy impact recoil.

conveyor_belt

Pallet Diverter Gate

Actuates routing gates on modular conveyor lines, where the 125 mm stroke quickly redirects heavy pallet traffic without requiring sensor feedback.

Is the Airtac SE63 Standard Cylinder SE63X125FA the Right Cylinder?

When sizing this 63 mm bore, compare its 1559 N push at 0.5 MPa against your actual load. If your application requires less force, stepping down to the 50 mm bore yields 982 N of push, whereas scaling up to the 80 mm bore provides 2513 N. The 125 mm stroke falls well within the standard range, so no made-to-order lead time is required. Remember that a standard double-acting cylinder like this relies on continuous air pressure to hold a load; if air is lost or a valve centers, the piston will drift. For strict position holding, consider the BSE rod lock variant or an external pilot-operated check valve.

The FA front flange accessory is ideal for resisting shear forces directly at the front faceplate. With a stroke of 125 mm, the side-load stress on the M16x1.5 rod thread and internal guide bearing remains moderate, but any long unsupported load should still use an external guide rail to prevent premature wear. The field-adjustable pneumatic cushioning at both ends can be tuned via a setscrew to soften end-stop impacts when cycling at speeds up to 800 mm/s.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X125FA FAQ

At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. It operates at speeds ranging from 30 to 800 mm/s.

Yes, the SE63X125FA is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, meaning it shares the exact same mounting footprint and front flange interface as other standard profile cylinders. However, note that this specific SKU lacks a built-in magnet, so it will not work with AirTAC CMSE or DMSE electronic sensors without modification.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X125FA

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X125FA and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.