
The AirTAC SE63 Standard Cylinder SE63X130 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 130mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X130 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. Its extruded aluminum barrel omits external tie rods entirely, yielding a smooth, corrosion-resistant body that mounts flush against machine frames while retaining the standardized ISO 15552 footprint for direct retrofitting.
This 63 mm bore unit utilizes a PT3/8 port and a 20 mm hard-chrome piston rod to achieve a 130 mm stroke. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration for moving loads, and because this specific SKU lacks the -S magnet, it arrives without built-in position sensing.
| Model | Airtac SE63 Standard Cylinder SE63X130 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Pushes raw bar stock through a spindle collet, utilizing the 1559 N thrust at 0.5 MPa to overcome guide tube friction.
Actuates a routing gate on a packaging conveyor, relying on the 130 mm stroke to clear passing pallets.
Drives mechanical arms to fold corrugated cardboard flaps prior to sealing, tuned via the adjustable end cushions to prevent crushing the box.
At 0.5 MPa, this 63 mm bore generates 1559 N of thrust. If your application requires less force, stepping down to the 50 mm bore yields 982 N of push; conversely, scaling up to the 80 mm bore provides 2513 N. Because this is a standard 130 mm stroke under the 1500 mm maximum, it ships as a routine configuration.
As a double-acting cylinder, the SE63X130 relies on continuous air pressure to hold its position. If a valve centers or air supply drops, the piston will drift and cannot sustain a load. For critical holding applications, consider the BSE rod-lock variant. To ensure accurate ISO 15552 direct compatibility, verify the PT3/8 port and standard mounting accessories match your existing manifold setup.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X130 delivers a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force increases to 2182 N, with a maximum push of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE63X130 features a standardized ISO 15552 / VDMA 24562 mounting interface and a square extruded profile without external tie rods, making it dimensionally interchangeable with other ISO 15552 profile cylinders using the same PT3/8 port and mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.