
The AirTAC SE63 Standard Cylinder SE63X145S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 145mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X145S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. It delivers a robust 1559 N push force at 0.5 MPa, utilizing a 63 mm bore and a 145 mm stroke. The extruded aluminum barrel design omits external tie rods, yielding a sleek, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics.
Equipped with a built-in magnet (-S), this model seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable air cushioning at both ends allows technicians to dial in end-cap deceleration via a dedicated screw, softening hard mechanical stops during high-speed operations without acting as a position lock.
| Model | Airtac SE63 Standard Cylinder SE63X145S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push force needed to firmly fold and seal corrugated carton blanks at cycle rates up to 800 mm/s.
Uses the 145 mm stroke to kick heavy pallets onto a secondary packaging line, relying on the adjustable cushion to absorb the shock of impact.
Shifts a secondary machining head into position on a CNC station, utilizing the -S magnet to trigger DMSE solid-state sensors for precise movement confirmation.
Generating 1559 N of push force at 0.5 MPa, this 63 mm bore cylinder fits perfectly between the 50 mm bore (982 N push) and the 80 mm bore (2513 N push) options, allowing you to step up or down depending on your exact load requirements. Because it is dimensionally interchangeable per ISO 15552, it serves as a direct replacement for other ISO 15552 cylinders, sharing standard mounting hardware like FA front flanges or TC center trunnions.
Keep in mind that a plain SE cylinder does not hold its position or load when air is exhausted or the valve is centered; the piston will drift. If your application requires static load holding without live pressure, consider the BSE rod lock variant. Additionally, while the 145 mm stroke is well within standard limits, any stroke of 300 mm or more on this bore requires an external guide to prevent rod-bearing bending under side loads.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE63X145S generates 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The maximum push force is 318 kgf at the operating pressure limit of 1.0 MPa.
Yes, the SE63X145S is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing footprints and reuse existing mounting hardware, though you must ensure your PT3/8 port threads match the AirTAC standard.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.