
The AirTAC SE63 Standard Cylinder SE63X150S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 150mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X150S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a 1559 N push force at 0.5 MPa. Driven by a 63 mm bore and 150 mm stroke, it operates efficiently between 0.15 and 1.0 MPa with a speed range of 30-800 mm/s.
This unit features an integrated -S magnet for non-contact position sensing via AirTAC CMSE reed or DMSE electronic switches. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush while exposing sensor grooves on three sides for flexible switch placement.
| Model | Airtac SE63 Standard Cylinder SE63X150S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates routing gates on high-speed beverage bottling conveyors, utilizing the 1559 N push force to swiftly pivot heavy guide arms without rebound.
Drives the mechanical arms that fold heavy corrugated cardboard flaps on automated case erecting machines, relying on the 150 mm stroke for complete travel.
Opens and closes the sliding safety blast doors on CNC turning centers, using the built-in magnet to confirm door closure for the machine interlock.
When sizing this 63 mm bore, you can step down to the 50 mm bore for 982 N push at 0.5 MPa, or step up to the 80 mm bore for 2513 N push at 0.5 MPa. The PT3/8 port and M16x1.5 rod thread accommodate robust pneumatic flow and moderate side loads. As a standard ISO 15552 footprint, it serves as a direct replacement for any cylinder sharing these exact mounting dimensions.
Note that the field-adjustable air cushion at both ends only decelerates the piston near stroke end to soften impacts; it is not a locking mechanism. If your application must hold a vertical load without live air pressure, you must pair this cylinder with an external pilot-operated check valve or transition to the AirTAC BSE rod-lock series.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 1559 N and the pull force is 1402 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE63X150S is dimensionally interchangeable per ISO 15552 standards. You can use it as a direct replacement for other ISO 15552 profile cylinders of the same bore and stroke, utilizing standard mounting accessories.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.