
The AirTAC SE63 Standard Cylinder SE63X150SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 150mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X150SFTC is a double-acting single-rod ISO 15552 profile cylinder delivering a 1559 N push at 0.5 MPa. It features a square extruded aluminum barrel without external tie rods, making the body highly corrosion-resistant and easy to mount flush against machine frames. The built-in magnet (-S) allows precise tracking using CMSE reed or DMSE electronic sensors.
Equipped with a center trunnion (FTC) mounting accessory, this unit handles pivoting loads effectively. The field-adjustable air cushion at both ends uses a needle screw to decelerate the piston near stroke end, softening hard mechanical stops during high-speed operations up to 800 mm/s.
| Model | Airtac SE63 Standard Cylinder SE63X150SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 150 mm stroke to actuate diverter gates on packaging lines, relying on the 1559 N push to overcome carton friction.
Secures aluminum castings during machining via the FTC trunnion, allowing the clamp to pivot away for part unloading.
Drives rotary indexing tables in beverage filling stations, using the adjustable cushion to protect glass containers at cycle ends.
This 63 mm bore provides a 1559 N push at 0.5 MPa. If your application requires less force, stepping down to a 50 mm bore yields 982 N of push. Conversely, scaling up to an 80 mm bore provides 2513 N. Keep in mind that a plain SE cylinder will drift if air pressure is lost; for position holding without live pressure, consider the BSE rod lock variant.
The FTC center trunnion is ideal for mid-mounted pivoting, but at 150 mm stroke, ensure the load is guided to prevent rod-bearing bending. For retrofits, the standardized ISO 15552 mounting interface ensures direct compatibility with other ISO 15552 cylinders, sharing the PT3/8 port and M16x1.5 rod thread.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, it delivers 1559 N of push and 1402 N of pull. At 0.7 MPa, the push increases to 2182 N, with a maximum push of 318 kgf at 1.0 MPa. The operating speed ranges from 30 to 800 mm/s.
Yes, the -S code indicates a built-in magnet designed specifically for AirTAC CMSE (reed) and DMSE (electronic) sensors, which mount directly into the sensor grooves on the extruded barrel.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.