verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X170SFA

The AirTAC SE63 Standard Cylinder SE63X170SFA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 170mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke170 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$111.63 $119.13Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X170SFA

The AirTAC SE63X170SFA is a double-acting single-rod profile cylinder built to the ISO 15552 standard. It generates a substantial 1559 N push force at 0.5 MPa, making it well-suited for mid-weight industrial actuation. Equipped with an FA front flange, it mounts securely to flat faces to handle high thrust loads without shifting.

This 63 mm bore unit features a square extruded aluminum barrel without external tie rods, which keeps the body compact and resistant to corner corrosion while allowing sensors to seat flush. The integrated -S magnet supports AirTAC CMSE reed and DMSE electronic position switches, and the field-adjustable pneumatic cushioning at both ends lets you fine-tune end-of-stroke deceleration for fast moving payloads.

Airtac SE63 Standard Cylinder SE63X170SFA Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X170SFA
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke170 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X170SFA

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×170Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X170SFA Is Used

straighten

Press Die Ejection

Uses the 1559 N extend force to positively eject stamped metal blanks from a press die, relying on the FA front flange to absorb the inline shock during high-speed stripping.

packaging

Corrugated Box Flap Folding

Drives a mechanical arm to fold heavy cardboard flaps on a packaging line, where the 170 mm stroke provides the exact reach needed and the -S magnet confirms fold completion via a DMSE sensor.

conveyor_belt

Pallet Diverter Gate

Actuates a heavy routing gate to redirect loaded pallets between conveyor lanes, utilizing the adjustable end cushions to soften the stopping impact of the massive 63 mm bore thrust.

Is the Airtac SE63 Standard Cylinder SE63X170SFA the Right Cylinder?

Selecting this 63 mm bore involves sizing against its neighbours: if 1559 N push at 0.5 MPa is excessive, step down to the 50 mm bore (982 N push); if your application demands more power, step up to the 80 mm bore (2513 N push). The 170 mm stroke provides ample travel, and because the standard 63 mm bore uses a PT3/8 port and M16x1.5 rod thread, it handles robust cycle rates. For dimensionally interchangeable ISO 15552 retrofits, match the 63 mm bore, 170 mm stroke, FA flange, and -S magnet.

Because this is a double-acting cylinder, it relies on continuous air pressure to hold a load; if air is lost or the valve centers, the piston will drift and drop the payload. The adjustable air cushion only decelerates the piston near stroke end and does not function as a mechanical lock. If your workflow requires true position holding without live pressure, consider the AirTAC BSE rod-lock variant or an external pilot-operated check valve.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X170SFA FAQ

At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, and it reaches a maximum push of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

Yes, the SE63X170SFA is dimensionally interchangeable per ISO 15552. You can drop it in to replace other ISO 15552 profile cylinders with a 63 mm bore and 170 mm stroke. Just ensure you match the PT3/8 port, FA front flange mounting, and use the built-in magnet with AirTAC CMSE or DMSE sensors.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X170SFA

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X170SFA and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.