
The AirTAC SE63 Standard Cylinder SE63X175 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 175mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X175 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing no vulnerable hardware to the working environment.
Field-adjustable pneumatic cushioning at both end caps allows technicians to tune the deceleration of the 175 mm stroke via a set screw, softening hard end stops at high cycling speeds. This specific SKU lacks a built-in magnet, meaning it is not equipped for CMSE or DMSE position sensing without modification.
| Model | Airtac SE63 Standard Cylinder SE63X175 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push force required to reliably fold and seal heavy cardboard flaps on high-speed packaging lines.
Shifts loaded pallet diverters along a 175 mm stroke, utilizing the extruded profile barrel for flush mounting on conveyor frames.
Positions sheet metal backstops with precise 1402 N retract force, taking advantage of the adjustable end cushions to prevent bounce.
Delivering 1559 N push at 0.5 MPa, this 63 mm bore sits comfortably in the mid-range. If your application requires less force, the 50 mm bore variant offers 982 N push, while stepping up to the 80 mm bore provides 2513 N push for heavier loads. Because this is a standard double-acting cylinder, it cannot hold a load in place if air pressure is lost or the valve is centered; for position holding, consider the BSE rod-lock variant.
As a true ISO 15552 cylinder, it serves as a direct replacement for any standard 63 mm bore, 175 mm stroke profile cylinder with a PT3/8 port and standardized mounting accessories. For a 175 mm stroke, ensure the 20 mm rod and M16x1.5 thread are not subjected to excessive side loads; use an external guide rail to prevent rod-bearing bending.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X175 generates 1559 N of push force and 1402 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 2182 N, and the maximum push force is 318 kgf at 1.0 MPa.
Yes, the SE63X175 is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing foot or flange mounts using the same PT3/8 port locations, provided your stroke and 63 mm bore match.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.