Airtac SE63 Standard Cylinder SE63X175SCBCR
The AirTAC SE63 Standard Cylinder SE63X175SCBCR is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 175mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke175 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63X175SCBCR
The AirTAC SE63X175SCBCR is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a 1559 N push force at 0.5 MPa. Equipped with a CB double clevis mounting and a built-in S magnet for CMSE or DMSE position sensing, it handles robust rotary actuation tasks with precision.
Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush on OEM machinery. The field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration, softening hard impacts during high-speed cycling.
Airtac SE63 Standard Cylinder SE63X175SCBCR Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63X175SCBCR |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63X175SCBCR
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63X175SCBCR Is Used
Textile Loom Beam Let-Off
Provides the 1559 N push force and CB clevis pivot needed to maintain precise, steady tension on warp beams during high-speed weaving operations.
Bottling Line Capper Head
Utilizes the built-in S magnet with DMSE sensors to verify capper head descent over 175 mm, ensuring consistent torque application on plastic bottle caps.
Pallet Conveyor Diverter Arm
Leverages the adjustable end cushions to smoothly decelerate the diverter mechanism, preventing jarring stops that could misalign heavy pallets.
Is the Airtac SE63 Standard Cylinder SE63X175SCBCR the Right Cylinder?
This 63 mm bore generates 1559 N push at 0.5 MPa; if your assembly needs less force, step down to the 50 mm bore offering 982 N, or step up to the 80 mm bore providing 2513 N for heavier payloads. The CB clevis supplied here is ideal for pivoting loads, but remember that a plain SE cylinder will drift if air pressure is lost—use a BSE rod lock for fail-safe holding.
With a 175 mm stroke, the 20 mm rod and M16x1.5 thread handle moderate side loads, but long unsupported strokes still require an external guide to prevent rod-bearing bending. It serves as a direct ISO 15552 dimensional replacement, matching standard mounting footprints and PT3/8 ports seamlessly.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63X175SCBCR FAQ
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No. The adjustable air cushions at both ends only decelerate the piston near the stroke end; they are not locking mechanisms. If air is lost or the valve is centered, the cylinder will drift. For fail-safe position holding, you need a BSE rod lock variant or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63X175SCBCR
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.