
The AirTAC SE63 Standard Cylinder SE63X175SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 175mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X175SFTC is a double-acting single-rod profile cylinder operating at 1559 N push and 1402 N pull at 0.5 MPa. Built to the ISO 15552 standard, its square extruded aluminum barrel omits external tie rods, yielding a compact body that mounts flush against machine frames while resisting corrosion. The integrated -S magnet enables precise end-position detection with CMSE reed or DMSE electronic sensors.
Field-adjustable pneumatic cushioning at both ends allows technicians to tune the 36 mm cushion length via a set screw, softening hard end-stops during high-speed 30-800 mm/s operations. Equipped with a PT3/8 port, an M16x1.5 rod thread, and an FTC center trunnion mounting accessory, this 63 mm bore unit handles rigorous linear motion tasks without relying on fixed rubber bumpers.
| Model | Airtac SE63 Standard Cylinder SE63X175SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 1559 N of clamping force at 0.5 MPa to secure aluminum engine blocks during CNC machining, utilizing the FTC trunnion to accommodate angular self-alignment.
Drives the folding mechanism on automated packaging lines, using the 175 mm stroke to erect corrugated cartons while the DMSE electronic sensor verifies cycle completion.
Actuates routing gates on heavy-duty conveyor networks, relying on the field-adjustable cushion to soften the 36 mm stroke termination and protect the 318 kgf payload capacity.
When sizing this 63 mm bore class, stepping down to a 50 mm bore reduces the 0.5 MPa push to 982 N, while stepping up to an 80 mm bore increases it to 2513 N. This SE63X175SFTC configuration includes the -S magnet for position sensing and the FTC mount for trunnion mounting. For direct retrofits, it is dimensionally interchangeable with any ISO 15552 profile cylinder sharing the 175 mm stroke and PT3/8 porting.
Because this model features a 175 mm stroke, the unsupported piston rod is subjected to bending moments under lateral loads; always pair it with an external guide rail to prevent rod-bearing wear. Note that the adjustable air cushion only decelerates the piston near stroke end and does not hold the load—if air pressure drops, the cylinder drifts, requiring a BSE rod lock for secure positioning.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
This 63 mm bore cylinder delivers a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force is 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552, allowing direct replacement for any standard profile cylinder with a 63 mm bore and 175 mm stroke. The included FTC accessory provides a center trunnion mount, allowing the cylinder to pivot freely on a pin to handle lateral misalignment.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.