
The AirTAC SE63 Standard Cylinder SE63X180 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 180mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X180 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a highly compact, corrosion-resistant body that mounts flush against machine frames. This clean profile simplifies retrofitting into tight automation cells without protruding hardware.
This 63 mm bore, 180 mm stroke model features field-adjustable pneumatic cushioning at both ends, allowing technicians to dial in end-of-stroke deceleration and soften hard impacts during high-speed cycling. Note that this specific SKU lacks a built-in magnet, so it does not directly support CMSE or DMSE position sensing without modification.
| Model | Airtac SE63 Standard Cylinder SE63X180 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the precise 1559 N push and 180 mm travel needed to fold and seal major flaps on high-speed corrugated carton erectors without stalling.
Positions sheet metal backstops on CNC press brakes, using its adjustable end cushions to absorb kinetic energy during rapid approach cycles.
Actuates routing gates on modular conveyor lines, relying on the compact tie-rod-free barrel to fit within narrow transfer frame clearances.
Delivering 1559 N push at 0.5 MPa, this 63 mm bore unit sits perfectly between the 50 mm bore (982 N push) and the 80 mm bore (2513 N push) options, allowing you to step down for lighter clamping or up for heavier lifting. As a standard ISO 15552 profile cylinder, it serves as a direct dimensional replacement for other ISO 15552 cylinders, sharing standardized mounting accessories like FA front flanges or TC trunnions. Since this SKU lacks the -S magnet, you will need to add one if your control system requires CMSE or DMSE sensor feedback. At 180 mm of stroke, the load is well-supported, but for any future upgrades beyond 300 mm, an external guide becomes essential to prevent rod-bearing bending.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE63X180 provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N. The maximum allowable operating pressure is 1.0 MPa, which yields a maximum push force of 318 kgf.
Yes, the SE63X180 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint, port sizes (PT3/8), and rod-end thread (M16x1.5) of comparable cylinders, allowing for seamless direct retrofits.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.