verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X182S

The AirTAC SE63 Standard Cylinder SE63X182S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 182mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke182 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$103.25 $110.75Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X182S

The AirTAC SE63X182S is a double-acting, single-rod ISO 15552 profile cylinder featuring a 63 mm bore and 182 mm stroke. It delivers a robust 1559 N push force at 0.5 MPa, making it well-suited for mid-weight industrial actuation. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.

This unit includes a built-in magnet (-S) for use with AirTAC CMSE reed and DMSE electronic position sensors. Field-adjustable pneumatic cushioning at both ends allows you to fine-tune end-of-stroke deceleration via a set screw, softening hard mechanical stops during high-speed operations.

Airtac SE63 Standard Cylinder SE63X182S Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X182S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke182 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X182S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×182Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X182S Is Used

packaging

Carton Erector Flaps

Provides the 1559 N push force required to smoothly fold and seal heavy corrugated carton flaps during high-speed packaging line operations.

conveyor_belt

Pallet Divertor Gate

Shifts heavy wooden pallets across a transfer line, utilizing the 182 mm stroke to clear the conveyor path for routing.

factory

Press Die Ejection

Ejects formed sheet metal parts from a hydraulic press bed, using adjustable end cushions to prevent part deformation upon ejection.

Is the Airtac SE63 Standard Cylinder SE63X182S the Right Cylinder?

Stepping down to a 50 mm bore reduces the 0.5 MPa push to 982 N, whereas moving up to an 80 mm bore increases it to 2513 N, allowing you to scale the actuator precisely to your load. Because this is a standard double-acting cylinder, it will not hold a load if air pressure drops or the valve centers; use a BSE rod lock variant if static holding is required. To retrofit an existing ISO 15552 fixture, match the 63 mm bore, 182 mm stroke, PT3/8 port, and mounting hardware. With a 182 mm stroke, the 20 mm rod handles moderate side loads, but always verify bearing wear if guiding heavy payloads.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X182S FAQ

At 0.5 MPa, the SE63X182S provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force is 2182 N. The maximum allowable push force is 318 kgf at 1.0 MPa.

Yes, the SE63X182S is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing mounting hardware, provided you match the PT3/8 port and 182 mm stroke. The built-in magnet also supports AirTAC CMSE and DMSE sensors.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X182S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X182S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.