
The AirTAC SE63 Standard Cylinder SE63X18S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 18mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X18S is a double-acting single-rod profile cylinder built to ISO 15552 dimensions, delivering a push force of 1559 N at 0.5 MPa. Its 18 mm stroke is a non-standard made-to-order length, providing exact short-travel actuation for specialized tooling. The square extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
Equipped with a built-in magnet (-S), this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection. Field-adjustable air cushioning at both ends allows technicians to tune the end-of-stroke deceleration via a set screw, softening hard impacts during rapid 30-800 mm/s cycles.
| Model | Airtac SE63 Standard Cylinder SE63X18S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 18 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×18 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 1559 N push force across an 18 mm travel to secure heavy steel billets inside CNC machining centers prior to milling.
Executes rapid 18 mm tucking motions on high-speed packaging lines, relying on the -S magnet and DMSE sensors to verify fold completion.
Pivots heavy pneumatic diverters on conveyor systems, using the adjustable end cushions to soften stops during 30-800 mm/s actuation.
This 63 mm bore fits between the 50 mm option (982 N push at 0.5 MPa) and the 80 mm option (2513 N push at 0.5 MPa), allowing you to step down for lighter duties or up for heavier loads. With its non-standard 18 mm stroke, ensure your machinery has the exact end-fixture clearance for this short-travel design. Because the plain SE cylinder relies on live air pressure and will drift if air is lost or the valve centers, use a BSE rod lock variant if the application requires fail-safe load holding.
The PT3/8 ports and M16x1.5 rod thread provide a robust interface for this force class. Being dimensionally interchangeable per ISO 15552, it serves as a direct replacement for other ISO 15552 profile cylinders, sharing standard mounting accessories like FA front flanges or LB foot brackets without requiring custom fabrication.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The maximum push force is 318 kgf when operated at the 1.0 MPa pressure limit.
Yes, the SE63X18S is dimensionally interchangeable per ISO 15552. You can use it as a direct replacement for other ISO 15552 profile cylinders, matching the existing PT3/8 port locations and mounting hole patterns. The built-in magnet also allows seamless integration with AirTAC CMSE or DMSE position sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.