
The AirTAC SE63 Standard Cylinder SE63X190 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 190mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X190 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 1559 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This 63 mm bore unit features field-adjustable air cushioning at both ends to tame impact forces at stroke extremes, operating via a PT3/8 port. Note that this specific SKU is supplied without a piston magnet, meaning it is not ready for CMSE or DMSE electronic position sensing without modification.
| Model | Airtac SE63 Standard Cylinder SE63X190 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 1559 N of clamping force at 0.5 MPa to hold plastic sheets against a 190 mm stroke mold frame during heating cycles.
Extends 190 mm to actuate a pusher arm on a packaging line, using its adjustable end cushions to stop heavy pallets smoothly without shock.
Drives a mechanical folding arm at up to 800 mm/s to tuck top flaps on corrugated cartons prior to tape sealing.
Stepping down to a 50 mm bore drops the 0.5 MPa push force to 982 N, while stepping up to an 80 mm bore increases it to 2513 N, giving you clear scaling options around this 190 mm stroke. Because the 63 mm bore uses a 20 mm rod and M16x1.5 thread, it handles moderate side loads well, though any stroke at or beyond 300 mm demands an external guide to prevent rod-bearing bending.
As a true ISO 15552 profile cylinder, it serves as a direct dimensional replacement for other standard cylinders, sharing identical mounting footprints like LB foot or FA front flange. Remember that the adjustable cushion only decelerates the piston near the end caps; if your process must hold a load vertically without live air pressure, you need a BSE rod lock or external pilot check valve.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force is 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. It operates at speeds ranging from 30 to 800 mm/s.
Yes, the SE63X190 is dimensionally interchangeable with any standard ISO 15552 cylinder, matching mounting dimensions and PT3/8 port locations. However, because this specific SKU lacks the -S magnet option, it cannot be used with CMSE or DMSE position sensors without changing the piston assembly.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.