
The AirTAC SE63 Standard Cylinder SE63X200FTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X200FTC is a double-acting single-rod profile cylinder delivering 1559 N of push force at 0.5 MPa alongside 1402 N of pull force. Built to ISO 15552 dimensional standards, its square extruded aluminum barrel omits external tie rods entirely, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
This 63 mm bore unit travels a 200 mm stroke and utilizes an FTC mounting accessory. Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration, softening hard impacts when cycling at speeds up to 800 mm/s. Because this specific SKU lacks the -S magnet suffix, it is not equipped for CMSE or DMSE position sensing out of the box.
| Model | Airtac SE63 Standard Cylinder SE63X200FTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Routes heavy PET bottle cases between packaging lanes, utilizing the 1559 N push force to positively shift mass without bounce.
Opens and closes heavy machine tool safety enclosures, relying on the adjustable cushion to soften the 200 mm stroke end stops.
Folds heavy cardboard flaps prior to hot-melt gluing, where the 1402 N retract force ensures tight mechanical positioning.
Selecting this 63 mm bore makes sense when a 50 mm cylinder (providing 982 N push at 0.5 MPa) is underpowered, but an 80 mm bore (delivering 2513 N push) would be physically oversized. The FTC mount provides a rigid rear flange interface for secure longitudinal mounting. As a standard ISO 15552 cylinder, it serves as a direct replacement for any compatible footprint, utilizing a PT3/8 port and a 20 mm rod with an M16x1.5 thread.
Note that a plain double-acting cylinder drifts if air pressure is lost or the valve is centered; it cannot hold a vertical load mid-stroke. For applications requiring positive holding without live air, consider the BSE rod-lock variant. Furthermore, while the 200 mm stroke is well within standard limits, always support any heavy external load with an external guide to prevent excessive bending stress on the rod bearing.
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE63X200FTC is dimensionally interchangeable with any standard ISO 15552 profile cylinder, matching standard mounting dimensions and utilizing a PT3/8 port. The FTC flange mount allows for straightforward retrofits without custom bracketry.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.