
The AirTAC SE63 Standard Cylinder SE63X200SFB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X200SFB is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. It delivers a robust 1559 N push force at 0.5 MPa (2182 N at 0.7 MPa) across a 200 mm stroke, utilizing a PT3/8 port and a 20 mm hard-chrome piston rod. Designed with a square extruded aluminum barrel, it eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This FB rear flange variant includes a built-in magnet (-S) for direct compatibility with AirTAC CMSE reed and DMSE electronic position sensors. The field-adjustable pneumatic cushioning at both ends allows technicians to precisely tune end-of-stroke deceleration, protecting payloads from harsh mechanical impacts during high-speed cycling.
| Model | Airtac SE63 Standard Cylinder SE63X200SFB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 1559 N of clamping force at 0.5 MPa to secure aluminum engine blocks during high-speed CNC milling operations.
Uses the 200 mm stroke and FB rear flange to push heavy wooden pallets smoothly onto a secondary packaging conveyor line.
Drives a mechanical folding blade at up to 800 mm/s to tuck and seal corrugated cardboard flaps on a continuous packaging line.
Selecting this 63 mm bore cylinder makes sense when a 50 mm bore (982 N push at 0.5 MPa) is underpowered for your load, but an 80 mm bore (2513 N push) would be physically oversized. The 200 mm stroke provides ample extension for mid-range automation. Because the FB rear flange handles heavy axial loads, ensure your mounting structure handles the 318 kgf maximum thrust at 1.0 MPa. Since the stroke is below 300 mm, side-load stress on the rod bearing is moderate, though an external guide is still recommended for heavy off-center loads.
As a true ISO 15552 profile cylinder, it serves as a direct replacement for any standard ISO 15552 cylinder matching the 63 mm bore, 200 mm stroke, and PT3/8 port. Note that this standard SE model cannot hold a load if air pressure drops; if your application requires static positioning safety during pressure loss, upgrade to the BSE series rod lock variant.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The 63 mm bore provides 1559 N push and 1402 N pull at 0.5 MPa. At 0.7 MPa, the push force is 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. It features a PT3/8 port and an M16x1.5 rod-end thread.
Yes, the built-in magnet (-S) supports AirTAC CMSE reed and DMSE electronic sensors. Furthermore, its dimensions adhere strictly to ISO 15552 standards, meaning it is fully interchangeable with any other ISO 15552 profile cylinder of the same bore and stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.