
The AirTAC SE63 Standard Cylinder SE63X200SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X200SFTC is a double-acting single-rod ISO 15552 profile cylinder delivering a 1559 N push force at 0.5 MPa. It features a 63 mm bore, a 200 mm stroke, and a PT3/8 port. Engineered for rigorous pneumatic tasks, it integrates an FTC mounting accessory and a built-in magnet for position sensing.
The extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant profile that mounts flush in tight machine cavities. Field-adjustable air cushions at both ends allow you to tune end-of-stroke deceleration, protecting payloads from harsh impacts. The integrated magnet supports AirTAC CMSE reed and DMSE electronic sensors for precise switching along the stroke.
| Model | Airtac SE63 Standard Cylinder SE63X200SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push at 0.5 MPa needed to reliably fold and seal heavy cardboard flaps on continuous packaging lines.
Uses the 200 mm stroke to extend a routing flap, diverting wooden pallets onto a secondary transfer chain.
Actuates the safety chute door on a CNC turning center, using the FTC mount and CMSE magnet for reliable position feedback.
This 63 mm bore generates 1559 N push at 0.5 MPa. If your application requires less force, step down to the 50 mm bore (982 N push); if you need more power, step up to the 80 mm bore (2513 N push). With a 200 mm stroke, the 20 mm rod and M16x1.5 thread handle moderate side loads, but for longer unsupported strokes over 300 mm, an external guide prevents rod-bearing bending.
The SE is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 cylinders using the same bore, stroke, PT3/8 port, and FTC mounting hardware. Remember that a standard SE does not hold its load when air is lost or the valve is centered; the piston will drift. For position holding without live pressure, consider the BSE rod lock variant.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the 63 mm bore provides 1559 N push and 1402 N pull force. At 0.7 MPa, the push force is 2182 N, with a maximum push of 318 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes. The SE profile cylinder is dimensionally interchangeable per ISO 15552, meaning it serves as a direct replacement for other ISO 15552 cylinders sharing the same 63 mm bore, 200 mm stroke, and PT3/8 port interface. The built-in magnet also works seamlessly with AirTAC CMSE and DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.