
The AirTAC SE63 Standard Cylinder SE63X20S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 20mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X20S is a double-acting single-rod ISO 15552 profile cylinder engineered for compact, high-force actuation. Operating at 0.5 MPa, it generates 1559 N of push force and 1402 N of pull force, making it highly effective for short-stroke clamping and heavy-duty positioning tasks.
This unit features a square extruded aluminum barrel without external tie rods, which streamlines the exterior and allows for flush mounting on tight machine frames. Equipped with a built-in magnet (S option), it supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable air cushioning at both ends allows technicians to tune deceleration and soften mechanical impacts.
| Model | Airtac SE63 Standard Cylinder SE63X20S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Utilizes the 1559 N push force at 0.5 MPa to rapidly secure upper press brake tooling, taking advantage of the short 20 mm stroke for fast response times.
Deploys a robust 20 mm stroke to push heavy pallets onto auxiliary conveyor tracks, where the 1402 N pull force ensures reliable retraction under friction.
Provides consistent ejection force for molded plastic parts, using the integrated magnet to trigger DMSE electronic sensors for precise cycle timing.
Selecting the SE63X20S is optimal when your application requires substantial force within a minimal 20 mm stroke envelope. If your project demands less force, stepping down to the 50 mm bore yields 982 N of push at 0.5 MPa, whereas scaling up to the 80 mm bore provides 2513 N at 0.5 MPa for heavier loads. Because this is a standard double-acting cylinder, it will not hold a load if air pressure is lost or the valve is centered; applications requiring static position holding should utilize a BSE rod lock or external pilot-operated check valve. As a dimensionally interchangeable ISO 15552 component, it serves as a direct replacement sharing standard mounting hardware, PT3/8 ports, and the -S magnet configuration.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE63X20S delivers 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. It operates at speeds between 30-800 mm/s and uses a PT3/8 port.
No, the field-adjustable air cushioning at both ends only decelerates the piston near the stroke limits to prevent hard impacts; it is not a locking mechanism. The cylinder will drift if air pressure is lost or the valve is centered. For position holding, consider the BSE rod lock variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.