
The AirTAC SE63 Standard Cylinder SE63X210 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 210mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X210 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa over a 210 mm stroke. Its extruded aluminum square barrel omits external tie rods entirely, yielding a flush, corrosion-resistant body that mounts cleanly against machine frames while retaining the standardized ISO 15552 footprint.
This specific SKU lacks the built-in position-sensing magnet, meaning it operates purely as a blind actuator without CMSE or DMSE electronic switch integration. Field-adjustable pneumatic cushioning at both end caps allows technicians to dial in the exact deceleration rate for the 36 mm cushion length, softening hard mechanical stops during high-speed cycling.
| Model | Airtac SE63 Standard Cylinder SE63X210 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a heavy-duty routing gate on a 50 kg pallet conveyor line, utilizing the 1559 N extend force to reliably push boxed goods onto a secondary spur without bouncing.
Drives the mechanical folder arms on an automated carton erector, using the 210 mm stroke to fold major flaps precisely before tape application at cycle speeds up to 800 mm/s.
Pushes a secondary ejector platen on a mid-sized injection molding machine, requiring the 318 kgf max push capacity to break the vacuum seal on newly formed plastic parts.
Stepping down to a 50 mm bore reduces the 0.5 MPa push to 982 N, whereas moving up to an 80 mm bore increases it to 2513 N, so the 63 mm bore is the optimal middle ground for loads requiring roughly 1.5 kN of extend force. Because this 210 mm stroke approaches the threshold where rod side-loading becomes a concern, supporting the load with an external guide rail prevents undue bending stress on the 20 mm rod and its bearing.
As a true ISO 15552 cylinder, this unit serves as a direct dimensional direct replacement for any standard 63 mm profile cylinder with a PT3/8 port and a 210 mm stroke. Note that the adjustable air cushion only decelerates the piston near stroke end; if your process must hold a vertical load without live air pressure, you must integrate an external pilot-operated check valve or specify a BSE rod-lock variant.
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, and it reaches a maximum push of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other 63 mm profile cylinders. However, the adjustable air cushion only decelerates the piston near the stroke end and does not function as a brake; the cylinder will drift if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.