
The AirTAC SE63 Standard Cylinder SE63X210S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 210mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X210S is a double-acting, single-rod ISO 15552 profile cylinder featuring a 63 mm bore and a 210 mm stroke. It delivers a robust 1559 N push force at 0.5 MPa, making it well-suited for mid-weight industrial actuation. The extruded aluminum barrel omits external tie rods, yielding a compact footprint that resists corrosion and mounts flush against machine frames.
This specific unit includes a built-in magnet (-S) for position sensing with AirTAC CMSE reed or DMSE electronic switches. Because the 210 mm stroke is non-standard, it is produced as a made-to-order item. It incorporates field-adjustable air cushioning at both ends to decelerate the piston near stroke end, and its PT3/8 ports pair with a 20 mm rod to handle high side loads.
| Model | Airtac SE63 Standard Cylinder SE63X210S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push needed to divert heavy loaded pallets on packaging lines, while the adjustable cushion softens the end-of-stroke impact.
Holds automotive castings securely during machining, using the built-in magnet to confirm clamp engagement to the PLC.
Drives mechanical flap-folding arms on continuous packaging equipment where the 210 mm stroke accommodates varied box widths.
If your application requires less force, stepping down to the 50 mm bore yields 982 N of push at 0.5 MPa. Conversely, moving up to the 80 mm bore provides 2513 N of thrust. Remember that a standard SE cylinder relies on live air pressure to hold its position; if air is lost, the piston drifts. For positive holding, consider the BSE rod-lock variant. Because this stroke is 210 mm, the 20 mm rod and bearing can experience bending under heavy lateral loads—use an external guide to prevent premature wear.
As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders, simplifying retrofits. To match this exact configuration, specify the 63 mm bore, 210 mm stroke, PT3/8 ports, basic mounting, and the -S magnet.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 1559 N and the pull force is 1402 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable with other ISO 15552 profile cylinders and shares standard mounting hardware. The built-in -S magnet also works seamlessly with AirTAC CMSE and DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.