
The AirTAC SE63 Standard Cylinder SE63X225 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 225mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X225 is a double-acting single-rod ISO 15552 profile cylinder engineered for robust linear motion. Operating at 0.5 MPa, it delivers 1559 N of push force and 1402 N of pull force, making it well-suited for mid-weight industrial handling. The unit features a PT3/8 port and a 20 mm hard-chrome piston rod with an M16x1.5 thread.
Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant profile that mounts flush against machine frames. Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration, softening hard impacts during high-speed operations. This specific 225 mm stroke is a non-standard, made-to-order length, providing exact reach for specialized tooling without requiring custom spacers.
| Model | Airtac SE63 Standard Cylinder SE63X225 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Utilizes the 1559 N push force at 0.5 MPa to deflect heavy wooden pallets onto secondary packaging lines without stalling.
Leverages the 225 mm non-standard stroke to reach across wide corrugated cartons, tucking flaps precisely before sealing.
Employs the 1402 N retract force to pull heavy injection molding core pins safely back inside the tool before the mold opens.
Selecting the SE63X225 provides a 63 mm bore generating 1559 N push at 0.5 MPa. If your application requires less force, the 50 mm bore variant offers 982 N push, whereas stepping up to the 80 mm bore yields 2513 N push for heavier payloads. Because this is a 225 mm stroke, it is a non-standard made-to-order size, ensuring precise tooling reach. The 20 mm rod and M16x1.5 thread handle moderate side loads, but for an unsupported 225 mm extension, integrating an external guide rail prevents rod-bearing bending and premature wear.
As a standard ISO 15552 profile cylinder, it serves as a direct dimensional replacement for other ISO 15552 cylinders, sharing identical mounting hardware and footprint. This unit lacks a built-in position-sensing magnet, so it cannot host CMSE or DMSE electronic switches without modification. Furthermore, the adjustable air cushion only decelerates the piston near stroke end; it does not lock or hold a load. If your process requires vertical position holding when air pressure is lost, utilize an AirTAC BSE rod lock or an external pilot-operated check valve.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X225 delivers 1559 N of push force and 1402 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 2182 N. The maximum push force is 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, its standardized ISO 15552 mounting dimensions make it a direct retrofit for other profile cylinders. However, the adjustable air cushion only decelerates the piston near stroke end and does not hold a load. If unpowered position holding is required, a separate AirTAC BSE rod lock mechanism is necessary.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.