verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X232SN

The AirTAC SE63 Standard Cylinder SE63X232SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 232mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke232 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$110.23 $117.73Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X232SN

The AirTAC SE63X232SN is a double-acting single-rod ISO 15552 profile cylinder with a 63 mm bore and a 232 mm stroke. Because 232 mm is a non-standard length, it is produced as a made-to-order unit while retaining the exact standardized VDMA 24562 mounting footprint. It generates 1559 N of push force at 0.5 MPa and 2182 N at 0.7 MPa, making it well-suited for mid-weight industrial actuation.

This unit features an NBR seal for reliable standard-temperature sealing and a built-in magnet for position sensing. The extruded aluminum barrel has no external tie rods, yielding a smooth, compact body that resists corrosion and mounts flush against machine frames. Furthermore, the field-adjustable air cushion at both ends allows technicians to fine-tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed cycling.

Airtac SE63 Standard Cylinder SE63X232SN Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X232SN
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke232 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X232SN

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×232Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X232SN Is Used

conveyor_belt

Bottling Line Diverter

Provides 1559 N push at 0.5 MPa to reliably divert heavy cases of beverages on a high-speed packaging conveyor.

precision_manufacturing

CNC Lathe Door Actuator

Uses the 232 mm stroke to fully open safety enclosures, with the NBR seal handling standard shop-floor temperatures.

warehouse

Pallet Stacking Pusher

Drives goods into palletizing lanes, relying on the adjustable pneumatic cushion to soften the end stop at speed.

Is the Airtac SE63 Standard Cylinder SE63X232SN the Right Cylinder?

If your application requires slightly less force, stepping down to a 50 mm bore yields 982 N of push at 0.5 MPa, whereas stepping up to an 80 mm bore provides 2513 N. This 63 mm model uses a PT3/8 port, a Ø20 mm rod with an M16x1.5 thread, and includes the -S magnet for CMSE (reed) or DMSE (electronic) sensors. Because the stroke is 232 mm, the unsupported piston rod length increases; for heavy offset loads, adding an external guide prevents rod-bearing bending. Remember that a standard SE cylinder will drift and cannot hold a load if air pressure is lost; for position holding, consider the BSE rod lock variant. As a true ISO 15552 cylinder, it serves as a dimensionally interchangeable direct replacement for other ISO 15552 profile cylinders.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X232SN FAQ

At 0.5 MPa, it provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The maximum allowable push force is 318 kgf at 1.0 MPa.

Yes. The SE63X232SN is a true ISO 15552 / VDMA 24562 profile cylinder, meaning it is dimensionally interchangeable with other ISO 15552 cylinders and shares standard mounting accessories. It includes a magnetic piston for CMSE and DMSE sensors.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X232SN

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X232SN and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.