
The AirTAC SE63 Standard Cylinder SE63X240 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 240mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X240 is a double-acting single-rod ISO 15552 profile cylinder delivering a 1559 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. This clean profile also prevents debris buildup in harsh environments.
Because this specific SKU lacks the built-in magnet suffix (-S), it does not support AirTAC CMSE or DMSE position sensors out of the box. The field-adjustable pneumatic cushioning at both stroke ends can be tuned via a screw to soften kinetic impact during high-speed 30-800 mm/s cycles.
| Model | Airtac SE63 Standard Cylinder SE63X240 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push at 0.5 MPa needed to reliably fold heavy corrugated carton flaps during 240mm extension cycles.
Uses the 1402 N retract force to swiftly pivot diverter gates on packaging lines without tying up valuable floor space.
Positions sheet metal backstops with precision, leveraging the 36mm cushion length to decelerate the 20mm rod smoothly at stroke end.
Delivering 1559 N push at 0.5 MPa, this 63mm bore sits perfectly between the 50mm bore (982 N push) and the 80mm bore (2513 N push) options, letting you scale force up or down as your payload demands. Remember that a plain SE cylinder relies entirely on live air pressure to hold a load; if air is lost, the piston drifts, so use a BSE rod lock for fail-safe holding.
For an ISO 15552 retrofit, match the 63mm bore, 240mm stroke, PT3/8 port, and your required mounting accessory. Since the 240mm stroke exceeds 300mm, no external guide is strictly mandated here, but the 20mm rod and M16x1.5 thread handle moderate side loads well; longer unsupported strokes will need external guide rails to prevent rod-bearing bending.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X240 generates a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force reaches 2182 N. The maximum allowable push force is 318 kgf at 1.0 MPa operating pressure.
Yes, the SE63X240 is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 profile cylinders using the same mounting hardware and PT3/8 port interface.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.