
The AirTAC SE63 Standard Cylinder SE63X265S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 265mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X265S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal pneumatics from workshop debris.
This 63 mm bore unit travels a 265 mm stroke and includes a built-in magnet (-S) for direct compatibility with AirTAC CMSE reed and DMSE electronic position sensors. The field-adjustable air cushioning at both ends allows technicians to fine-tune end-of-stroke deceleration, softening mechanical impacts during high-speed cycling.
| Model | Airtac SE63 Standard Cylinder SE63X265S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 265 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×265 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 1559 N push force and 265 mm stroke to reliably kick heavy timber pallets off a main conveyor belt onto a secondary packaging spur.
The -S magnet pairs with DMSE sensors to confirm ejection of steel bar stock, while the adjustable cushion absorbs the impact of rapid part ejection.
Leverages the compact no-tie-rod profile to fit flush in tight machine cells, driving the 265 mm stroke to fold heavy cardboard flaps prior to sealing.
Select this 63 mm bore when a 50 mm bore (982 N push @0.5 MPa) lacks the power to move a load but an 80 mm bore (2513 N push @0.5 MPa) would introduce unnecessary physical bulk and air consumption. The PT3/8 port and M16x1.5 rod thread provide a robust interface for this mid-range force class.
Because the 265 mm stroke exceeds the 300 mm threshold, the extended piston rod is susceptible to bending under lateral loads; always implement an external linear guide to prevent rod-bearing damage. As a standard double-acting cylinder, it will drift if air pressure is lost—use a BSE series rod lock for strict position-holding requirements. This model serves as a dimensionally interchangeable direct replacement for any ISO 15552 cylinder.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, it provides 1559 N of push and 1402 N of pull force. At 0.7 MPa, the push force is 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The pneumatic port size is PT3/8.
Yes. The SE63X265S shares the exact ISO 15552 / VDMA 24562 mounting interface and body dimensions, making it a direct retrofit for other ISO 15552 profile cylinders using standard mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.