verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X280

The AirTAC SE63 Standard Cylinder SE63X280 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 280mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke280 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$112.81 $120.31Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X280

The AirTAC SE63X280 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 1559 N of push force and 1402 N of pull force at a 0.5 MPa operating pressure. Driven by a 63 mm bore and a 280 mm stroke, it operates at speeds between 30-800 mm/s. The square extruded aluminum barrel eliminates protruding external tie rods, yielding a highly compact, corrosion-resistant body that mounts flush against machine frames while leaving three dedicated sensor grooves open for position switches.

This unit relies on a field-adjustable pneumatic cushion at both ends to decelerate the piston near stroke termination, allowing technicians to dial in end-of-stroke softness via a set screw rather than absorbing harsh impacts with a fixed rubber bumper. Because this specific SKU lacks the built-in -S magnet, it does not directly support AirTAC CMSE or DMSE electronic position sensing without modification. The standardized ISO 15552 / VDMA 24562 mounting interface ensures strict dimensional interchangeability with other compliant cylinders, streamlining retrofits.

Airtac SE63 Standard Cylinder SE63X280 Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X280
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke280 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X280

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×280Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X280 Is Used

precision_manufacturing

CNC Pallet Clamping

Provides the 1559 N push force required to secure heavy machining pallets against a locator stop before the CNC door closes.

packaging

Corrugated Box Forming

Utilizes the 280 mm stroke to drive the forming platen down through heavy corrugated cardboard, relying on adjustable cushions to halt the platen smoothly.

conveyor_belt

Bottle Diverting Gate

Pushes filled beverage containers across a high-speed packaging line, using the extruded profile barrel to mount flush within tight conveyor frames.

Is the Airtac SE63 Standard Cylinder SE63X280 the Right Cylinder?

Selecting the SE63X280 is appropriate when a task requires roughly 1559 N of push force at 0.5 MPa. If your application demands less energy, stepping down to the 50 mm bore yields 982 N of push, whereas scaling up to the 80 mm bore provides 2513 N. This cylinder uses a PT3/8 port and a 20 mm rod with an M16x1.5 thread. Since this is a 280 mm stroke, the extended piston rod is highly susceptible to side-load bending; utilizing an external guide rail is strongly recommended to prevent premature rod-bearing wear.

As a standard double-acting actuator, the SE63X280 will drift and cannot hold a load if air pressure is lost or the control valve is centered. If your machinery requires true mid-stroke position holding under lost pressure, you must integrate an external pilot-operated check valve or transition to the AirTAC BSE rod-lock variant. For straightforward ISO 15552 direct replacement, match the 63 mm bore, 280 mm stroke, PT3/8 port, and your specific mounting accessory.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X280 FAQ

At 0.5 MPa, the SE63X280 generates 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, and the proof pressure is 1.5 MPa.

No. The adjustable air cushions at both ends only decelerate the piston near the stroke limits; they do not act as a brake or lock. If air is exhausted, the cylinder will drift. For vertical load holding, you need an external rod lock or the AirTAC BSE variant.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X280

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X280 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.