
The AirTAC SE63 Standard Cylinder SE63X290 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 290mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X290 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a 1559 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This 63 mm bore unit features a 290 mm stroke and uses a PT3/8 port. Because this specific SKU lacks the -S magnet suffix, it cannot host CMSE or DMSE position sensors without modification. The field-adjustable air cushioning at both ends allows technicians to dial in end-of-stroke deceleration, softening hard impacts when cycling at speed.
| Model | Airtac SE63 Standard Cylinder SE63X290 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Pushes heavy timber pallets transversely on a packaging line, utilizing the 1559 N push force to overcome friction without stalling.
Drives carton side-flap folders on a continuous flow wrapper, relying on the 290 mm stroke to clear varying box widths.
Ejects stamped metal blanks from a die set, using the adjustable cushion to gently slow the rod before the end cap.
When sizing this actuator, compare its 1559 N push against your dynamic load: the smaller 50 mm bore yields 982 N, while the larger 80 mm bore provides 2513 N at 0.5 MPa. Because this is a standard double-acting cylinder, it will drift and cannot hold a load if air pressure drops or the valve centers; use a BSE rod lock for fail-safe holding. For direct retrofits, this model is dimensionally interchangeable with other ISO 15552 cylinders sharing the 63 mm footprint, 290 mm stroke, and PT3/8 porting.
With a 290 mm stroke, the 20 mm rod and internal bearing face increased bending moments under side loads. For optimal seal life, mount an external guide to prevent rod deflection during extension.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes, the SE63X290 shares the standardized ISO 15552 / VDMA 24562 mounting interface, making it dimensionally interchangeable with other 63 mm profile cylinders. Ensure your setup matches the PT3/8 port and M16x1.5 rod thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.