verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X30S

The AirTAC SE63 Standard Cylinder SE63X30S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 30mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke30 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$82.78 $90.28Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X30S

The AirTAC SE63X30S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact, short-stroke automation. Operating at 0.5 MPa, it provides a robust 1559 N push force and 1402 N pull force, making it highly effective for mid-range actuation. The square extruded aluminum barrel eliminates external tie rods, yielding a flush, corrosion-resistant body that mounts cleanly in tight machine cells.

Equipped with a built-in magnet (-S), this unit seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. It features field-adjustable pneumatic cushioning at both ends, allowing technicians to tune deceleration via a set screw to soften hard mechanical stops during rapid 30 mm cycles.

Airtac SE63 Standard Cylinder SE63X30S Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X30S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke30 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X30S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×30Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X30S Is Used

precision_manufacturing

Press Die Ejection

Deploys the 1559 N push force to eject stamped metal parts from tight press dies, utilizing the 30 mm stroke for rapid, localized ejection without occupying excessive vertical clearance.

packaging

Carton Flap Folding

Drives mechanical arms to fold corrugated cardboard flaps on continuous packaging lines, where the short 30 mm stroke and integrated DMSE sensor detection ensure high-speed, synchronized cycling.

straighten

Bending Jig Stopper

Acts as a rigid, adjustable stopper in tube bending jigs, leveraging the 1402 N pull force to hold a workpiece firmly in position against the forming tool during the bend cycle.

Is the Airtac SE63 Standard Cylinder SE63X30S the Right Cylinder?

Selecting this 63 mm bore is optimal when a 50 mm cylinder (offering 982 N push at 0.5 MPa) lacks the necessary power, but an 80 mm bore (providing 2513 N push) would be physically oversized. The PT3/8 port and 36 mm cushion length efficiently manage the high air volume of this bore. To ensure a direct retrofit, match the 30 mm stroke, PT3/8 port thread, and ISO 15552 mounting interface. Because the stroke is only 30 mm, side-load stress on the M16x1.5 rod thread is minimal. Note that the adjustable air cushion only decelerates the piston near the stroke ends; it does not lock or hold the load if air pressure is lost.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X30S FAQ

The SE63X30S delivers a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force increases to 2182 N, with an absolute maximum push of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

Yes, it is dimensionally interchangeable with any standard ISO 15552 cylinder, sharing identical mounting and pilot hole dimensions for direct replacement. The -S code indicates a built-in magnet designed specifically for flush mounting with AirTAC CMSE reed switches and DMSE solid-state sensors in the three-sided barrel grooves.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X30S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X30S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.