
The AirTAC SE63 Standard Cylinder SE63X340FA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 340mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X340FA is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. Driven by filtered air through a PT3/8 port, it operates reliably between 0.15 and 1.0 MPa with a speed range of 30-800 mm/s. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. This FA variant uses a front flange mounting interface to secure the head end, providing a rigid anchor for lateral loads. Field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-of-stroke deceleration via a set screw, protecting the 340 mm stroke from hard impacts. Because this SKU lacks a built-in magnet, it does not support AirTAC CMSE or DMSE position sensors without modification.
| Model | Airtac SE63 Standard Cylinder SE63X340FA |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 340 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×340 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Gates and diverts heavy PET bottle traffic on high-speed packaging lines, utilizing the 1559 N push force and front flange rigidity to absorb repeated lateral impacts.
Pushes finished metal shafts out of a CNC lathe spindle, where the 340 mm stroke clears the work envelope and the adjustable cushion softens the rapid extraction stop.
Acts as a robust physical stop for inbound wooden pallets on a gravity roller conveyor, using its 63 mm bore to halt 50 kg unit loads without bouncing.
Generating 1559 N push at 0.5 MPa, this 63 mm bore sits perfectly between the 50 mm (982 N) and 80 mm (2513 N) options. Step down to the 50 mm if your payload is lighter to save space and air volume, or step up to the 80 mm if you need to overcome higher friction. At 340 mm of stroke, the 20 mm rod and thread face increased bending moments under side loads; an external guide rail is recommended to prevent rod-bearing wear. As a double-acting cylinder, it relies on live air pressure to hold position and will drift if air is lost or a valve centers. For suspended loads requiring failsafe holding, consider the BSE rod lock variant. Dimensionally interchangeable per ISO 15552, it serves as a direct replacement for other ISO 15552 profile cylinders using identical FA front flange hardware.
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N, with an absolute maximum of 318 kgf at 1.0 MPa. It features a PT3/8 port, a 20 mm rod, and an M16x1.5 rod-end thread.
No. The adjustable air cushion at both ends only decelerates the piston near the stroke limits; it is not a mechanical brake. If air is exhausted or the valve centers, the rod will drift. For suspended load holding, use a BSE rod lock cylinder or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.