
The AirTAC SE63 Standard Cylinder SE63X350SFA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 350mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X350SFA is a double-acting single-rod profile cylinder built to ISO 15552 standards, delivering a robust 1559 N push at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. Equipped with an FA front flange, it handles heavy face-mounted loads securely.
This 63 mm bore unit includes a built-in magnetic piston for non-contact position sensing via CMSE reed or DMSE electronic switches. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts when cycling at speeds up to 800 mm/s.
| Model | Airtac SE63 Standard Cylinder SE63X350SFA |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 1559 N extend force and 350 mm stroke to drive raw bar stock into the spindle collet, relying on the FA flange to stabilize the long pusher arm.
Cycles at high speed to fold heavy cardboard enclosure flaps, using the adjustable end cushions to prevent harsh mechanical slamming during the 350 mm travel.
Leverages the 2182 N thrust at 0.7 MPa to swing a diverter gate on a packaging line, while the -S magnet triggers DMSE sensors to confirm gate position.
Choosing this 63 mm bore is ideal when you need 1559 N of push force at 0.5 MPa. If your application is lighter, stepping down to the 50 mm bore yields 982 N of push; if you require substantially more power, stepping up to the 80 mm bore provides 2513 N. Because this model features a 350 mm stroke, the extended rod is subject to bending under lateral loads—always incorporate an external guide rail to prevent rod-bearing wear.
This cylinder is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 cylinders without altering mounting centers. It includes an FA front flange, a PT3/8 port, and an -S magnet for position detection. Remember that the adjustable air cushion only decelerates the piston near stroke end; it is not a locking device. If the machine must hold a vertical load without live air pressure, specify a BSE rod lock variant instead.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
This 63 mm bore cylinder delivers a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force is 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552, acting as a direct replacement for other ISO 15552 profile cylinders using the same FA front flange. However, it cannot hold a load if air pressure is lost; the adjustable cushion only decelerates the piston near the end of stroke and does not function as a brake.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.