
The AirTAC SE63 Standard Cylinder SE63X35S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 35mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X35S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. Its 63 mm bore and 35 mm stroke make it a compact, high-thrust actuator for tight machinery layouts. The extruded aluminum barrel design omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against frames while protecting internal pneumatics.
This specific unit includes a built-in magnet (-S) for non-contact position detection using AirTAC CMSE reed or DMSE electronic sensors. Both end caps feature field-adjustable pneumatic cushioning, allowing technicians to tune the 36 mm cushion length to soften hard end stops during high-speed 30-800 mm/s cycling.
| Model | Airtac SE63 Standard Cylinder SE63X35S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 1559 N push force at 0.5 MPa to securely clamp heavy cast iron engine blocks onto machining centers during high-speed milling operations.
Leverages the 35 mm short stroke and DMSE electronic sensor feedback to rapidly index and square corrugated cardboard blanks in automated packaging lines.
Provides a fast 30-800 mm/s retraction speed and 1402 N pull force to eject stamped sheet metal parts from tight progressive die cavities without lingering.
Selecting the SE63X35S is optimal when your application requires the 1559 N push force at 0.5 MPa that a 63 mm bore provides. If you need less thrust, stepping down to the 50 mm bore yields 982 N push, while stepping up to the 80 mm bore provides 2513 N push for heavier payloads. Because the 35 mm stroke is short, side-load stress on the rod bearing is minimal, but always ensure the load is guided to prevent binding.
As a dimensionally interchangeable ISO 15552 cylinder, this model serves as a direct replacement for other ISO 15552 profile cylinders, matching the 63 mm footprint, PT3/8 port, and standard mounting accessories. Remember that a standard SE does not hold a load when air is exhausted; if your process demands fail-safe position holding, consider the BSE rod-lock variant.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No, the adjustable air cushion at both ends only decelerates the piston near the stroke end; it is not a mechanical brake. If the air supply is lost or exhausted, the cylinder will drift. For fail-safe load holding, use the BSE rod-lock variant or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.