
The AirTAC SE63 Standard Cylinder SE63X360 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 360mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X360 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting the bore from mechanical snagging.
This 63 mm bore unit features a 20 mm hard-chrome rod and a PT3/8 port. Because this specific SKU lacks the -S magnet code, it does not support CMSE or DMSE position sensing out of the box. Field-adjustable pneumatic cushioning at both stroke ends allows technicians to dial in end-of-stroke deceleration via a set screw, softening hard mechanical stops during high-speed 360 mm traverses.
| Model | Airtac SE63 Standard Cylinder SE63X360 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 360 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×360 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push at 0.5 MPa required to consistently fold heavy corrugated cardboard flaps on high-speed case erectors over a 360 mm span.
Shifts loaded pallets onto secondary processing lines, utilizing the full 360 mm stroke to clear the main conveyor path without tie-rod interference.
Releases heavy machining clamps on multi-axis CNC tables, where the extruded profile allows flush mounting to avoid spindle collisions.
Stepping down to the 50 mm bore drops the 0.5 MPa push output to 982 N, whereas moving up to the 80 mm bore increases it to 2513 N. This SE63X360 is dimensionally interchangeable with other ISO 15552 profile cylinders, meaning you can drop it into existing footprints (LB, FA, TC) without re-drilling. As a standard double-acting cylinder, it will drift if air pressure is lost or a valve centers; use a BSE variant if the load must be mechanically locked.
With a 360 mm stroke, the 20 mm rod exerts leverage on the guide bearing under side loads. For heavy offset loads, implement an external guide rail to prevent premature bushing wear.
Quick checklist
At 0.5 MPa, the SE63X360 generates 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa.
No, this specific SKU lacks the -S magnet code, so it cannot trigger CMSE reed or DMSE electronic sensors. If position feedback is required for your 360 mm stroke, select the SE63X360S variant instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.