
The AirTAC SE63 Standard Cylinder SE63X430 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 430mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X430 is a double-acting single-rod profile cylinder with a 63 mm bore and 430 mm stroke, built to the ISO 15552 dimensional standard. It generates 1559 N of push force at 0.5 MPa and 2182 N at 0.7 MPa, making it well-suited for mid-weight linear actuation. The extruded aluminum barrel lacks external tie rods, yielding a smooth, compact body that resists corrosion and mounts flush against machine frames.
This SKU ships without a piston magnet, so it does not support CMSE or DMSE position sensing out of the box. Field-adjustable pneumatic cushioning at both ends allows you to tune the end-of-stroke deceleration via a set screw, softening hard mechanical stops when cycling at speeds up to 800 mm/s.
| Model | Airtac SE63 Standard Cylinder SE63X430 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 430 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×430 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push force needed to deflect heavy pallets onto a secondary conveyor branch at 0.5 MPa operating pressure.
Drives the mechanical arms that fold corrugated cardboard major flaps, utilizing the 430 mm stroke to clear large container widths.
Advances raw bar stock into the collet, relying on the field-adjustable end cushions to prevent harsh end-stop impacts during high-speed loading.
If your assembly requires less force, the 50 mm bore neighbor provides 982 N of push at 0.5 MPa, while stepping up to the 80 mm bore yields 2513 N for heavier payloads. Because this is a plain double-acting cylinder, it cannot hold a load or maintain position if air pressure is lost or the valve is centered; the piston will drift. For fail-safe holding, consider a BSE rod-lock variant or an external pilot-operated check valve.
With a 430 mm stroke, the 20 mm diameter piston rod has an extended unsupported length that increases the risk of rod-bearing bending under side loads. For heavy offset loads, use an external guide rail to prevent premature seal wear. This unit uses a PT3/8 port and M16x1.5 rod thread, and its standardized ISO 15552 mounting interface allows it to serve as a direct replacement for other ISO 15552 cylinders using existing mounting brackets.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE63X430 provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The maximum push force is 318 kgf at 1.0 MPa.
Yes, the SE63X430 is dimensionally interchangeable per ISO 15552, allowing it to drop into existing foot or flange mounts. It uses a PT3/8 port and lacks a position-sensing magnet on this specific configuration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.