
The AirTAC SE63 Standard Cylinder SE63X458S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 458mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X458S is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 458 mm stroke, delivering a robust 1559 N push force at 0.5 MPa. Its extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
Because this 458 mm length exceeds the standard 1500 mm maximum for a 63 mm bore, it is supplied as a made-to-order unit. The integrated -S magnet pairs directly with AirTAC CMSE reed and DMSE electronic sensors along the three-sided sensor groove, while the field-adjustable pneumatic cushioning at both ends softens end-of-stroke impacts.
| Model | Airtac SE63 Standard Cylinder SE63X458S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 458 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×458 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 1559 N push to deflect heavy timber pallets across a 458 mm span, relying on the adjustable end cushions to halt the mass smoothly without shock loading the conveyor frame.
Extends 458 mm to fold large corrugated carton flaps, utilizing the -S magnet to trigger DMSE electronic sensors for precise timing before the sealing head applies adhesive.
Pushes stamped metal body panels out of a die using 2182 N at 0.7 MPa, where the tie-rod-free extruded profile allows tight mounting inside the press bed.
Generating 1559 N of push at 0.5 MPa, this 63 mm bore fits neatly between the 50 mm bore (982 N push) and the 80 mm bore (2513 N push) if your payload requirements shift. Keep in mind that a standard SE cylinder relies on live air pressure to hold its load; if air is lost, the piston will drift, so a BSE rod lock is required for fail-safe positioning.
With a 458 mm stroke, the 20 mm rod and its bearing face bending moments under heavy lateral loads—always use an external guide rail to prevent premature wear. This model features a PT3/8 port, a built-in magnet (-S), and is dimensionally interchangeable per ISO 15552 for seamless hardware retrofits.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The 458 mm stroke is a non-standard, made-to-order length.
Yes, it is dimensionally interchangeable with other ISO 15552 profile cylinders, sharing standard mounting interface dimensions without claiming brand equivalence. The pneumatic cushions at both ends are field-adjustable via a screw, letting you tune the deceleration rate of the piston near the stroke ends to eliminate hard mechanical stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.