
The AirTAC SE63 Standard Cylinder SE63X45S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 45mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X45S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force and 1402 N of pull force at 0.5 MPa. Driven by a 63 mm bore and a 45 mm stroke, it operates efficiently at speeds between 30 and 800 mm/s via a PT3/8 port. The integrated -S magnet enables precise end-of-stroke detection when paired with AirTAC CMSE reed or DMSE electronic sensors.
Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. Furthermore, the field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed operations.
| Model | Airtac SE63 Standard Cylinder SE63X45S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Generates 1559 N of thrust at 0.5 MPa to securely clamp heavy steel castings onto machining centers, while the 45 mm stroke provides rapid actuation.
Uses the 1402 N retract force at 0.5 MPa to cleanly fold heavy corrugated cardboard flaps on continuous packaging lines at speeds up to 800 mm/s.
Delivers rapid 45 mm retraction to eject plastic parts from injection molds, leveraging the no-tie-rod profile for tight mold-base mounting.
For sizing context, the SE63X45S provides 1559 N of push at 0.5 MPa. If your application requires less force, the adjacent 50 mm bore offers 982 N of push, whereas stepping up to the 80 mm bore yields 2513 N, allowing you to scale thrust precisely. Because this is a 45 mm stroke, side-loading on the M16x1.5 rod thread is minimal, but always ensure the load is axially aligned to prevent premature seal wear.
As a standard ISO 15552 cylinder, it serves as a dimensionally interchangeable direct replacement for other ISO 15552 profile cylinders, simplifying retrofits. Remember that a standard SE does not hold a load if air pressure is lost; for vertical positioning safety, consider the BSE rod-lock variant. To equip position sensing, specify CMSE or DMSE switches to mate with the built-in magnet.
Quick checklist
At 0.5 MPa, the SE63X45S provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The maximum allowable push force is 318 kgf at 1.0 MPa.
No, the SE63X45S is a standard double-acting cylinder and the piston will drift if air is lost. The adjustable air cushion at both ends only decelerates the piston near the stroke end; it is not a locking mechanism. For fail-safe load holding, use the BSE rod-lock variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.