
The AirTAC SE63 Standard Cylinder SE63X500SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 500mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X500SFTC is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa and 2182 N at 0.7 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing standardized ISO 15552 dimensions for seamless retrofitting.
Equipped with a built-in magnet for CMSE reed and DMSE electronic position sensors, this 500 mm stroke unit relies on field-adjustable pneumatic cushioning at both ends to decelerate the piston smoothly before end-of-travel impact. The integrated FTC centre trunnion mount provides a pivoting anchor point, crucial for maintaining rod alignment in longer-stroke dynamic articulations.
| Model | Airtac SE63 Standard Cylinder SE63X500SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Leveraging the 500 mm stroke and 1559 N push force to extend and reroute heavy pallets onto parallel conveyor lanes without stalling the main line.
Uses the FTC trunnion mount to pivot smoothly with the machine geometry, driving the 20 mm rod to fold large packaging flaps at high cycling speeds.
Employs the built-in magnet and DMSE electronic sensors to confirm the exact 500 mm extension position for repeatable sheet metal bending back-gauging.
When sizing this actuator, compare its 1559 N push at 0.5 MPa against the neighbouring bores: a 50 mm bore yields 982 N, while an 80 mm bore provides 2513 N, letting you step up or down to match exact load margins. Because the 500 mm stroke creates extended leverage, the 20 mm rod and M16x1.5 thread face increased bending stress under side loading, making an external guide rail essential to prevent premature bearing wear.
For direct replacements, match the 63 mm bore, 500 mm stroke, PT3/8 port, and FTC mounting accessory. Note that a plain SE cylinder will drift and cannot hold a load if air pressure is lost or the valve is centered; if your application requires static holding, utilize a BSE rod lock variant or an external pilot-operated check valve.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
This 63 mm bore cylinder provides a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, its profile barrel offers dimensional interchangeability per ISO 15552, allowing it to replace other standard 63 mm bore cylinders using existing hardware. However, it does not hold position if air is lost; the adjustable air cushion only decelerates the piston near stroke end and acts as a brake.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.